Understanding milling induced changes: Some results
نویسندگان
چکیده
The effect of mechanical milling on materials has been studied using simple model systems. The results show that milling leads to enhancement in both thermodynamic driving force and transport kinetics. A study of some characteristic physical properties of the milled samples in comparison to the bulk shows how milling affects the properties.
منابع مشابه
Experiments and 3d Fem Simulations of Milling on a 304l Stainless Steel
Milling is among machining processes one of the most frequently used, but although milling processes operations are very used in mechanical engineering industries and as a lot of experimental results are available, some essential physical phenomena present difficulties of understanding. Indeed milling is a very complex process with physical interactions between shearing, compression, ploughing,...
متن کاملEffect of Mechanical Milling on the Morphologyand Structural Evaluation of Al-Al2O3 Nanocomposite Powders
The morphological and microstructural changes during mechanical milling of Al powder mixed with 2.5, 5 and 10 wt.% Al2O3 particles were studied. The milling was performed in a planetary ball mill for various times up to 20 h. The produced composite powders were investigated using X-ray diffraction pattern (XRD) to elucidate the role of particle size, secondary phase content and milling time on ...
متن کاملDynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process
In this research, the feasibility of using mathematical modelling in the ball milling process has been evaluated to verify the hardness changes of an aluminium nanostructure. Considering the model of normal force displacement (NFD), the radius of elastic-plastic and normal displacement of two balls were computed by applying analytical modelling and coding in MATLAB. Properties of balls and alum...
متن کاملEFFECT OF COMPOSITION AND MILLING TIME ON THE SYNTHESIS OF NANOSTRUCTURED Ni-Cu ALLOYS BY MECHANICAL ALLOYING METHOD
Ni and Cu elemental powder mixtures containing 25, 50, and 75% at Cu were subjected to mechanical alloying in a planetary ball mill under various milling times. Structural evolution was analyzed by means of X-ray diffraction and scanning electron microscopy. Experimental results indicated that nanostructured solid solution alloy powders having homogeneous distribution of Ni and Cu were formed b...
متن کاملThe Influence of Milling on the Dissolution Performance of Simvastatin
Particle size reduction is a simple means to enhance the dissolution rate of poorly water soluble BCS-class II and IV drugs. However, the major drawback of this process is the possible introduction of process induced disorder. Drugs with different molecular arrangements may exhibit altered properties such as solubility and dissolution rate and, therefore, process induced solid state modificatio...
متن کامل