Materials Analysis Using Synchrotron Radiation and Neutron Beams
نویسندگان
چکیده
To develop high-performance and high-reliability products that do not contain any hazardous substances, Fujitsu uses many analysis techniques and various types of equipment. To add to these, we have been developing materials analysis techniques using synchrotron radiation and neutron beams, which cannot easily be handled by general analysis equipment. For this analysis, we make use of national public research facilities. In this paper, we introduce the “SUNBEAM” beamline constructed by a consortium of 13 companies at the SPring-8 synchrotron radiation facility managed by RIKEN and give examples of how Fujitsu Laboratories is applying this beamline to materials analysis. We also introduce two future analysis technologies: analysis using the X-ray free electron laser now under construction at SPring-8 and neutron beam analysis at the Japan Proton Accelerator Research Complex (J-PARC) built in Tokaimura, Ibaraki prefecture, by the Japan Atomic Energy Agency (JAEA).
منابع مشابه
An investigation into the potential applicability of gel dosimeters for dosimetry in boron neutron capture therapy
Background: The aim of this work was to establish how well gel dosimeters performed, as substitutes for brain tissue compared with standard phantom materials such as water, polymethyl-methacrylate (or PMMA), A150 plastic and TE- liquid phantom material for dosimetry of neutron beams in boron neutron capture therapy. Materials and Methods: Thermal neutron fluence, photon dose and epithermal neu...
متن کاملبررسی تاثیر اندازه میدان فوتونی بر بیناب نوترون آلاینده در شتابدهنده خطی Elekta SL75/25 در انرژی MV18 به روش مونت کارلو
Background and purpose: High-energy photon beams above 8-10 MV used in external radiation therapy produce neutron in dealing with the linear accelerator components and other parts in radiation field. The weakening of neutrons due to the closing jaws collimator angle, in smaller field sizes can also be a contributing factor in changing the neutron spectrum. Since a direct measurement of the...
متن کاملDental Materials Effect in Neutron Contamination: Electron Mode of a Linac
Background: Neutron contamination is produced in electron beams of linac when tooth or dental materials are located in the path of beam. Objective: This study aims to determine the neutron dose contamination from different dental restoration materials in electron mode of a linac. Material and Methods: In this experimental study, the neutron dose contamination was calculated in the p...
متن کاملInvestigation of Developed Shield Composition to Neutron Shielding in Treatment Room for BNCT to Reduce Clinical Effects
Background and Aim: One of the best radiotherapy methods that have been suggested for the treatment of cancers such as brain, head and neck, skin, and recently liver is boron neutron capture therapy. Therefore, neutron shielding in the treatment room is important because the absorption of neutrons in the shield may lead to the production of gamma rays, which can have destructive effects. While ...
متن کاملSynchrotron-driven Spallation Sources
The use of synchrotrons for pulsed neutron spallation sources is an example of spin-off from the accelerator development prompted by particle physics. The first proposal for an accelerator-driven source with a thermalised neutron facility was in the 1960s (Intense Neutron Generator, ING) [1], but this project was never built. There was earlier work on 'electrical' breeders [2] and the direct bo...
متن کامل