Experimental Study on Precast Concrete Shear Walls with Different Hollow Slabs
نویسندگان
چکیده
To study mechanical behaviors of shear walls built with precast two-way hollow slabs, two shear walls with different details of hollow slabs were quasi-statically tested under low cyclic loading. The failure mode was analyzed, which vertical macro-cracks appeared on walls due to the details of hollow slabs. Brittle shear failure can be avoided in terms of the failure behaviors evolved from integral wall to the combination of wall and columns. Test results also show that that dimension of transverse holes can affect compressive capacity of the walls when it is larger than that of longitudinal holes in the hollow slab.
منابع مشابه
Design Considerations for the Connection of Precast Concrete Structures
The structural integrity of precast concrete buildings depends mainly on the connections between the precast structural components. Large precast concrete panels are used extensively in North America for low, medium, and highrise construction due to their ease and speed of assembly, and high quality control. This paper presents the results of twenty-two prototype specimens tested to investigate...
متن کاملExperimental Strengthening of the Two-way Reinforced Concrete Slabs with High Performance Fiber Reinforced Cement Composites Prefabricated Sheets
Reinforced concrete structures need to be strengthened and retrofitted for various reasons, including errors during design and/or construction, so in most cases strengthening of structural elements is much more economical than rebuilding the structure. Using HPFRCC with tensile stiffening behavior has been developed to strengthen the concrete structures over the recent few years. In this paper,...
متن کاملStudy on Metering Scheme of Seismic Experiment for Shear Wall Built with Precast Hollow Slab
Abstract: Shear deformation is the most principal deformation in the lateral deformation of shear wall built with precast hollow slab which is designed to be strong shearing and weak bending. The special mechanical characteristic of the shear wall is the relative deformation of the concrete on both sides of vertical and inner joint respectively. The study introduces the measuring scheme of shea...
متن کاملExperimental Study on Shear Performance of Innovated Precast Shear Walls with Different Yield Strength Grades of Reinforcements
Result and Conclusion: The results show that strength of horizontal bars has a little influence on the hysteretic behavior and the deformation ability. While the decrease of the strength of horizontal bars can increase the yield displacement and the peak displacement of the hollow slab shear walls. The hollow slab shear wall structure has good deformation capacity, and the brittle shear failure...
متن کاملFoam Concrete Precast Elements in Composite Concrete-GFRP Plate Girders
This paper is focused on using foam concrete as structural element in polymer-concrete composite plate girders. Trial mixes of foam concrete and different proportions of foam agent were considered to obtain the suitable mix that can be used as structural element in composite girders system. Details of the experimental investigations on foam concrete precast slabs and polymer-concrete composite ...
متن کامل