Design of the ILC Crab Cavity System
نویسندگان
چکیده
The International Linear Collider (ILC) has a 14 mrad crossing angle in order to aid extraction of spent bunches. As a result of the bunch shape at the interaction point, this crossing angle at the collision causes a large luminosity loss which can be recovered by rotating the bunches prior to collision using a crab cavity. The ILC baseline crab cavity is a 9-cell superconducting dipole cavity operating at a frequency of 3.9 GHz. In this paper the design of the ILC crab cavity and its phase control system, as selected for the RDR in February 2007 is described in fuller detail.
منابع مشابه
HOM/LOM Coupler Study for the ILC Crab Cavity*
The FNAL 9-cell 3.9GHz deflecting mode cavity designed for the CKM experiment was chosen as the baseline design for the ILC BDS crab cavity. The full 9cell CKM cavity including the coupler end-groups was simulated using the parallel eigensolver Omega3P and scattering parameter solver S3P. It was found that both the notch filters for the HOM/LOM couplers are very sensitive to the notch gap, whic...
متن کاملStatus of the Ilc Crab Cavity Development
The International Linear Collider (ILC) will require two dipole cavities to “crab" the electron and positron bunches prior to their collision. It is proposed to use two 9 cell SCRF dipole cavities operating at a frequency of 3.9 GHz, with a transverse gradient of 3.8MV/m in order to provide the required transverse kick. Extensive numerical modelling of this cavity and its couplers has been perf...
متن کاملCrab Compensation for Lhc Beams
An R&D program to establish a road map for the installation of crab cavities in the LHC is rapidly advancing. Both local and global crab schemes are under investigation to develop cavities that will be compatible with the LHC optics and meet the aperture requirements. Space and aperture constraints to accommodate a prototype crab cavity in the LHC along with related optics issues are presented....
متن کاملDevelopment of an Intelligent Cavity Layout Design System for Injection Molding Dies (RESEARCH NOTE)
This paper presents the development of an Intelligent Cavity Layout Design System (ICLDS) for multiple cavity injection moulds. The system is intended to assist mould designers in cavity layout design at concept design stage. The complexities and principles of cavity layout design as well as various dependencies in injection mould design are introduced. The knowledge in cavity layout design is ...
متن کاملCold Cavity BPM R&D for the ILC
A cold L-Band cavity BPM for installation in a SCRF cryomodule is currently under development at Fermilab. The BPM has to meet the ILC BPM specifications, i.e. < 1 μm single bunch, single pass resolution, going along with sufficient accuracy and reproducibility. Real estate limitations and the superconductive RF environment require some special considerations for this design.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007