Corrigendum: nanoSQUID operation using kinetic rather than magnetic induction
نویسندگان
چکیده
“Current injection has been demonstrated before as a viable means to control SQUIDs12–14 dominated by geometric inductance. These directly-coupled SQUIDs used a large pickup loop to convert an applied magnetic field into a current bias which was injected a smaller, more sensitive readout SQUID. Although the readout SQUIDs in these devices were smaller than the pickup loops, they still used large geometric inductors to route the injected current”.
منابع مشابه
nanoSQUID operation using kinetic rather than magnetic induction
We report on a method of nanoSQUID modulation which uses kinetic inductance rather than magnetic inductance to manip-ulate the internal fluxoid state. We produced modulation using injected current rather than an applied magnetic field. Using this injected current, we were able to observe the triangle-wave shaped modulation of the device critical current which was periodic according to the Londo...
متن کاملOptimizing the flux coupling between a nanoSQUID and a magnetic particle using atomic force microscope nanolithography
We present results of Niobium based SQUID magnetometers for which the weak-links are engineered by the local oxidation of thin films using an Atomic Force Microscope (AFM). Firstly, we show that this technique allows the creation of variable thickness bridges with 10 nm lateral resolution. Precise control of the weak-link milling is offered by the possibility to real-time monitor weak-link cond...
متن کاملExact Modeling and Simulation of Saturated Induction Motors with Broken Rotor Bars Fault using Winding Function Approach
Winding function method (WFM) provides a detailed and rather simple analytical modeling and simulation technique for analyzing performance of faulty squirrel-cage induction motors (SCIMs). Such analysis is mainly applicable for designing on-line fault diagnosis techniques. In this paper, WFM is extended to include variable degree of magnetic saturation by applying an appropriate air gap functio...
متن کاملSmart Starting of Induction Motor by Changing Core Magnetic Flux Value
Single-phase squirrel cage and three-phase induction electromotors are the most popular electromotors used in industry from long ago. When an induction motor starts with direct connection method, it takes a lot of current from the power supply (several times the nominal current); so, several methods have been devised to start such electromotors. These methods either reduce the voltage of the st...
متن کاملبررسی شدت میدان های مغناطیسی و الکتریکی اطراف رایانه های مورد استفاده و تاثیر آن بر سلامت کاربران
Background and aimsIntensity of Magnetic and Electric fields around visual displayterminals and its association on health effects were studied.Methodsmagnetic and electric fields intensities around 237 VDTs at distances 30¡50¡ 60 cm and different operating conditions (active¸ screen saver¸ shut down) with use of HI-3603 device according to Svensk standard method were monitored. Resultsmagnetic...
متن کامل