Combination of optimized transmit arrays and some receive array reconstruction methods can yield homogeneous images at very high frequencies.

نویسندگان

  • Christopher M Collins
  • Wanzhan Liu
  • Bryan J Swift
  • Michael B Smith
چکیده

Image inhomogeneity related to high radiofrequencies is one of the major challenges for high field imaging. This inhomogeneity can be thought of as having 2 radiofrequency-field related contributors: the transmit field distribution and the reception field distribution. Adjusting magnitude and phase of currents in elements of a transmit array can significantly improve flip angle homogeneity at high field. Effective application of some well-known parallel imaging and other receive array post-processing methods removes receptivity patterns from the intensity distribution in the final image, though noise then becomes a function of position in the final image. Here simulations are used to show that, assuming high signal-to-noise ratio, very homogeneous images in the human head can be acquired with the combination of transmit arrays and some receive array reconstruction methods at frequencies as high as 600 MHz.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

SVD based calibration of transmit arrays

Introduction: In order to optimally combine signals received from an array coil, the sensitivities of each element have to be known. Acquiring these receive sensitivities is especially challenging at ultra high field conditions using transmit-receive arrays (TRA), since signal voids induced by destructive interferences of the transmit B1 fields cause strong local noise amplification in the obta...

متن کامل

A 16-Channel Receive, Forced Current Excitation Dual-Transmit Coil for Breast Imaging at 7T

PURPOSE To enable high spatial and temporal breast imaging resolution via combined use of high field MRI, array coils, and forced current excitation (FCE) multi channel transmit. MATERIALS AND METHODS A unilateral 16-channel receive array insert was designed for use in a transmit volume coil optimized for quadrature operation with dual-transmit RF shimming at 7 T. Signal-to-noise ratio (SNR) ...

متن کامل

Assessment of the Characteristics of MRI Coils in Terms of RF Non-Homogeneity Using Routine Spin Echo Sequences

Introduction: One of the major causes of image non-uniformity in MRI is due to the existence of  non-homogeneity in RF receive and transmit. This can be the most effective source of error in  quantitative  studies  in  MRI  imaging.  Part  of  this  non-homogeneity  demonstrates  the  characteristics of RF coil and part of it is due to the interaction of RF field with the material being  imaged...

متن کامل

Array-optimized composite pulse for excellent whole-brain homogeneity in high-field MRI.

A number of methods to improve excitation homogeneity in high-field MRI have been proposed, and some of these methods rely on separate control of radiofrequency (RF) coils in a transmit array. In this work we combine accurate RF field calculations and the Bloch equation to demonstrate that by using a sequence of pulses with individually optimized current distributions (i.e., an array-optimized ...

متن کامل

Parallel transmit and receive technology in high-field magnetic resonance neuroimaging

The major radiofrequency engineering challenges of high-field MR neuroimaging are as follows: (1) to produce a strong, homogeneous transmit B1 field, while remaining within regulatory guidelines for tissue power deposition and (2) to receive the signal with the maximum signal-to-noise and the greatest flexibility in terms of utilizing the benefits of parallel imaging. Borrowing from development...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Magnetic resonance in medicine

دوره 54 6  شماره 

صفحات  -

تاریخ انتشار 2005