Computation of Optimal Actuator/sensor Locations

نویسنده

  • KIRSTEN MORRIS
چکیده

There is often freedom in choosing the location of actuators on systems governed by partial differential equations. The actuator locations should be selected in order to optimize the performance criterion of interest. The main focus of this thesis is to consider H∞ performance with state-feedback. That is, both the controller and the actuator locations are chosen to minimize the effect of disturbances on the output of a full-information plant. Optimal H∞-disturbance attenuation as a function of actuator location is used as the cost function. It is shown that the corresponding actuator location problem is well-posed. In practice, approximations are used to determine the optimal actuator location. Conditions for the convergence of optimal performance and the corresponding actuator location to the exact performance and location are provided. Examples are provided to illustrate that convergence may fail when these conditions are not satisfied. Systems of large model order arise in a number of situations; including approximation of partial differential equation models and power systems. The system descriptions are sparse when given in descriptor form but not when converted to standard first-order form. Numerical calculation of H∞-attenuation involves iteratively solving large H∞-algebraic Riccati equations (H∞-AREs) given in the descriptor form. An iterative algorithm that preserves the sparsity of the system description to calculate the solutions of large H∞-AREs is proposed. It is shown that the performance of our proposed algorithm is similar to a Schur method in many cases. However, on several examples, our algorithm is both faster and more accurate than other methods. The calculation of H∞ optimal actuator locations is an additional layer of optimization over the calculation of optimal attenuation. An optimization algorithm to calculate H∞ optimal actuator locations using a derivative-free method is proposed. The results are illustrated using several examples motivated by partial differential equation models that arise in control of vibration and diffusion.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Simple Approach for Determination of Actuator and Sensor Locations in Smart Structures Subjected To the Dynamic Loads

The present work demonstrates the successful application of a simple active vibration control procedure based on structural dynamics. Based on mathematical and structural dynamics’ theories, the appropriate locations of sensor and actuator locations of the smart structure are predicted. Also, the optimum value of actuator force which controls the structural vibrations as quickly as it is possib...

متن کامل

Optimal Locations on Timoshenko Beam with PZT S/A for Suppressing 2Dof Vibration Based on LQR-MOPSO

Neutralization of external stimuli in dynamic systems has the major role in health, life, and function of the system. Today, dynamic systems are exposed to unpredicted factors. If the factors are not considered, it will lead to irreparable damages in energy consumption and manufacturing systems. Continuous systems such as beams, plates, shells, and panels that have many applications in differen...

متن کامل

Pii: S0098-1354(01)00740-2

This paper focuses on transport-reaction processes with unknown time-varying parameters and disturbances described by quasi-linear parabolic PDE systems, and addresses the problem of computing optimal actuator/sensor locations for robust nonlinear controllers. Initially, Galerkin’s method is employed to derive finite-dimensional approximations of the PDE system which are used for the synthesis ...

متن کامل

Optimal Sensor and Actuator Locations in Linear Distributed Parameter Systems

A constructive method is developed to obtain optimal sensor and actuator locations for inverse optimal state estimation and control of a class of linear distributed parameter systems (DPSs). Given the inverse optimal state estimators and controllers for linear DPSs developed by the first author recently, it is shown that the performance index for optimal locations of sensors and actuators is th...

متن کامل

Optimization Strategy for Actuator and Sensor Placement in Active Structural Acoustic Control

In active structural acoustic control the goal is to reduce the sound radiation of a structure by means of changing the vibrational behaviour of that structure. The performance of such an active control system is to a large extent determined by the locations of the actuators and sensors. In this work an approach is presented for the optimization of the actuator and sensor locations. The approac...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013