Design and Fabrication of the KOMAC RFQ
نویسندگان
چکیده
A RFQ linac (3MeV, 350MHz, 20mA, CW and 324cm in length) is being built for the Korea Multipurpose Accelerator Complex (KOMAC). The physical and engineering design of the H/H RFQ linac are described. The fabrication process for the cold model and structure support is described. The current status of the RFQ is reported.
منابع مشابه
A 3.0MeV KOMAC/KTF RFQ Linac
The Radio-Frequency Quadrupole (RFQ) linac that will accelerate a 20mA proton beam from 50keV to 3MeV has been designed and is being fabricated as the first phase, KOMAC Test Facility (KTF), of the Korea Multipurpose Accelerator Complex (KOMAC) project at the Korea Atomic Energy Research Institute (KAERI). The physical, engineering designs and fabrication status of the RFQ are described.
متن کاملDevelopment of the Low Energy Accelerator for Komac
KAERI (Korea Atomic Energy Research Institute) has been performing the project named KOMAC (Korea Multi-purpose Accelerator Complex) within the frame work of national mid and long term nuclear research plan. The final objectives of KOMAC is to build a 20MW (1 GeV and 20 mA) cw (100% duty factor) proton linear accelerator. As the first stage, the low energy accelerator up to 20 MeV is being deve...
متن کاملSTATUS REPORT ON THE 5 MeV IPHI RFQ
A 5-MeV RFQ designed for a proton current up to 100-mA CW is now under construction as part of the High Intensity Proton Injector project (IPHI). Its computed transmission is greater than 99 %. The main goals of the project are to verify the accuracy of the design codes, to gain the know-how on fabrication, tuning procedures and operations, to measure the output beam characteristics in order to...
متن کاملFabrication and Testing of the First Module of the Sns Rfq
The 2.5 MeV injector for the Spallation Neutron Source is currently under construction at LBNL, which includes a 2.5 MeV high power, high duty factor four vane RFQ made of four modules. Transverse mode stabilization is obtained through a series of cross coupling rods. Each of the four RFQ modules is equipped with twenty fixed tuners, two active power and two vacuum ports. Fine frequency tuning ...
متن کاملPower Upgrade of J-parc Linac
The linac power upgrade program is now in progress, after a successful recovery from the earthquake disaster. The power upgrade includes an ion source, a RFQ, and a 400 MeV annular-ring coupled structure (ACS) linac. We started a full-scale development of a cesium-seeded RFdriven negative hydrogen ion source. The ion source extracted a beam current of more than 60 mA with a duty factor of 2.5 %...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1999