A DSP Feedback System on a Mixed Signal Tester and its Application in ADC Test
نویسندگان
چکیده
A DSP-based mixed signal tester with feedback capability provides great flexibility and versatility in real-time mixed signal device testing. In this project, a DSP-based feedback loop system is designed and implemented for the DSP module of Schlumberger's new mixed signal tester. This DSP-based feedback loop system provides a dynamic close-loop testing environment for waveform generation and data analysis. Also, an ADC servo-loop test for ADC output code transition edge search is developed to demonstrate the feasibility of this feedback loop system design. Thesis Supervisor: Hae-Seung (Harry) Lee Title: Professor of Electrical Engineering
منابع مشابه
Design and Implementation of Digital Demodulator for Frequency Modulated CW Radar (RESEARCH NOTE)
Radar Signal Processing has been an interesting area of research for realization of programmable digital signal processor using VLSI design techniques. Digital Signal Processing (DSP) algorithms have been an integral design methodology for implementation of high speed application specific real-time systems especially for high resolution radar. CORDIC algorithm, in recent times, is turned out to...
متن کاملTest Strategies for Embedded ADC Cores in a System-on-Chip, A Case Study
Testing of a deeply embedded mixed-signal core in a System-on-Chip (SoC) is a challenging issue due to the communication bottleneck in accessing the core from external automatic test equipment. Consequently, in many cases the preferred approach is built-in self-test (BIST), where the major part of test activity is performed within the unit-under-test and only final results are communicated to t...
متن کامل3.3V DSP for Digital Motor Control
New generations of motor control digital signal processors (DSPs) lower their supply voltages from 5V to 3.3V to offer higher performance at lower cost. Replacing traditional 5V digital control circuitry by 3.3V designs introduce no additional system cost and no significant complication in interfacing with TTL and CMOS compatible components, as well as with mixed voltage ICs such as power trans...
متن کاملMIXED SIGNAL LETTER Digital based calibration technique for continuous-time bandpass sigma-delta analog-to-digital converters
In this paper, a calibration technique for Noise Transfer Function (NTF) optimization of Continuous-Time Bandpass Sigma Delta (CT BP RD) modulators is presented. The proposed technique employs a test tone applied at the input of the quantizer to evaluate the noise transfer function of the Analog-to-Digital Converter (ADC) using the capabilities of the Digital Signal Processing (DSP) platform us...
متن کاملA Continuous-time Adc and Digital Signal Processing System for Smart Dust and Wireless Sensor Applications
In this paper an event-driven (ED) digital signal processing system (DSP), Analog-to-digital converter (ADC) and Digital-to-analog converter (DAC) operating in continuous-time (CT) with smart dust as the target application is presented. The benefits of the CT system compared to its conventional counterpart are lower in-band quantization noise and no requirement of a clock generator and anti-ali...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007