Polar-Coded Forward Error Correction for MLC NAND Flash Memory Polar FEC for NAND Flash Memory

نویسندگان

  • Haochuan Song
  • Frankie Fu
  • Cloud Zeng
  • Jin Sha
  • Zaichen Zhang
  • Xiaohu You
  • Chuan Zhang
چکیده

With the ever-growing storage density, high-speed, and low-cost data access, flash memory has inevitably become popular. Multi-level cell (MLC) NAND flash memory, which can well balance the data density and memory stability, has occupied the largest market share of flash memory. With the aggressive memory scaling, however, the reliability decays sharply owing to multiple interferences. Therefore, the control system should be embedded with a suitable error correction code (ECC) to guarantee the data integrity and accuracy. We proposed the pre-check scheme which is a multi-strategy polar code scheme to strike a balance between reasonable frame error rate (FER) and decoding latency. Three decoders namely binaryinput, quantized-soft, and pure-soft decoders are embedded in this scheme. Since the calculation of soft loglikelihood ratio (LLR) inputs needs multiple sensing operations and optional quantization boundaries, a 2-bit quantized hard-decision decoder is proposed to outperform the hard-decoded LDPC bit-flipping decoder with fewer sensing operations. We notice that polar codes have much lower computational complexity compared to LDPC codes. The stepwise maximum mutual information (SMMI) scheme is also proposed to obtain overlapped boundaries without exhausting search. The mapping scheme using Gray code is employed and proved to achieve better raw error performance compared to other alternatives. Hardware architectures are also given in this paper.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Secure NAND Flash Architecture Resilient to Strong Fault-Injection Attacks Using Algebraic Manipulation Detection Code

Multi-level cell (MLC) NAND flash memories are widely used because of their high data transfer rate, large storage density and long mechanical durability. Linear error correcting codes (ECC) such as Reed-Solomon (RS) codes and Bose-Chaudhuri-Hocquenghem (BCH) codes are often used for error correction. Although linear codes can efficiently detect and correct random errors, they are not sufficien...

متن کامل

Errors in Flash-Memory-Based Solid-State Drives: Analysis, Mitigation, and Recovery

NAND flash memory is ubiquitous in everyday life today because its capacity has continuously increased and cost has continuously decreased over decades. This positive growth is a result of two key trends: (1) effective process technology scaling; and (2) multi-level (e.g., MLC, TLC) cell data coding. Unfortunately, the reliability of raw data stored in flash memory has also continued to become ...

متن کامل

ERRoR ANAlysIs AND RETENTIoN-AwARE ERRoR MANAgEMENT FoR NAND FlAsh MEMoRy

With continued scaling of NAND flash memory process technology and multiple bits programmed per cell, NAND flash reliability and endurance are degrading. In our research, we experimentally measure, characterize, analyze, and model error patterns in nanoscale flash memories. Based on the understanding developed using real flash memory chips, we design techniques for more efficient and effective ...

متن کامل

A mathematical approach to NAND flash-memory descrambling and decoding

New mathematical techniques for analysis of raw dumps of NAND flash memory were developed. These techniques are aimed at detecting, by analysis of the raw NAND flash dump only, the use of LFSR-based scrambling and the use of a binary cyclic code for errorcorrection. If detected, parameter values for both LFSR and cyclic error-correcting code are determined simultaneously. These can subsequently...

متن کامل

Design and Implementation of FPGA System to Reduce Reed- Solomon Errors

The data reliability has become an important issue in most communication and storage systems for high speed operation and mass data process. Various error correction code are provided for improving data reliability. A Reed-Solomon code is quite suitable for burst errors, but in case of random errors, it has some difficulty. For MLC NAND flash memories, BoseChaudhuriHocquenghem (BCH) codes are f...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • CoRR

دوره abs/1802.04576  شماره 

صفحات  -

تاریخ انتشار 2018