Programmable Digital Bio-Impedance Measurement System
نویسندگان
چکیده
The field programmable gate array is the fastest growing technology. The bio-impedance measurement system is implemented in reconfigurable field programmable gate array hardware. The design of bio-impedance measurement system using Xilinx system generator is more convenient and cheaper for revising, if the Bio-impedance measurement system requires parameters changes in practical use, since no new hardware device is needed to make revise. The presented system is time saving, fast, adjustable system parameter and easy to use.
منابع مشابه
Field Programmable Gate Array–based Implementation of an Improved Algorithm for Objects Distance Measurement (TECHNICAL NOTE)
In this work, the design of a low-cost, field programmable gate array (FPGA)-based digital hardware platform that implements image processing algorithms for real-time distance measurement is presented. Using embedded development kit (EDK) tools from Xilinx, the system is developed on a spartan3 / xc3s400, one of the common and low cost field programmable gate arrays from the Xilinx Spartan fami...
متن کاملImpedance Estimation of a Vibrating Wire Viscosity Sensor Using Multi-Harmonic Signals
Abstrac t -This paper presents a method to estimate the impedance response of a vibrating wire viscosity sensor. The method is based on the application of a multi-harmonic signal at the terminals of the sensor. The signal is composed by the harmonics that correspond to the frequencies at which one wants to obtain the impedance of the sensor. The impedance is determined using least-squares (LS) ...
متن کاملDesign and Implementation of Field Programmable Gate Array Based Baseband Processor for Passive Radio Frequency Identification Tag (TECHNICAL NOTE)
In this paper, an Ultra High Frequency (UHF) base band processor for a passive tag is presented. It proposes a Radio Frequency Identification (RFID) tag digital base band architecture which is compatible with the EPC C C2/ISO18000-6B protocol. Several design approaches such as clock gating technique, clock strobe design and clock management are used. In order to reduce the area Decimal Matrix C...
متن کاملHandheld 2-channel impedimetric cell counting system with embedded real-time processing Citation
Lab-on-a-chip systems have been attracting a growing attention for the perspective of miniaturization and portability of bio-chemical assays. Here we present a the design and characterization of a miniaturized, USB-powered, self-contained, 2-channel instrument for impedance sensing, suitable for label-free tracking and real-time detection of cells flowing in microfluidic channels. This original...
متن کاملPhase Angle Measurement in Healthy Human Subjects through Bio-Impedance Analysis
Objective(s)Bioelectrical impedance is the measure of impedance of the body. Impedance consists of electric resistance and reactance. Phase angle (PA) is the tan value of the ratio of reactance versus electric resistance. PA depends on cell membrane integrity and on body cell mass. There exists a correlation between PA values and body cell mass.The objective of this study was to compare the PA ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014