Substitutional alloy of Ce and Al.
نویسندگان
چکیده
The formation of substitutional alloys has been restricted to elements with similar atomic radii and electronegativity. Using high-pressure at 298 K, we synthesized a face-centered cubic disordered alloy of highly dissimilar elements (large Ce and small Al atoms) by compressing the Ce(3)Al intermetallic compound >15 GPa or the Ce(3)Al metallic glass >25 GPa. Synchrotron X-ray diffraction, Ce L(3)-edge absorption spectroscopy, and ab initio calculations revealed that the pressure-induced Kondo volume collapse and 4f electron delocalization of Ce reduced the differences between Ce and Al and brought them within the Hume-Rothery (HR) limit for substitutional alloying. The alloy remained after complete release of pressure, which was also accompanied by the transformation of Ce back to its ambient 4f electron localized state and reversal of the Kondo volume collapse, resulting in a non-HR alloy at ambient conditions.
منابع مشابه
Ce and La single- and double-substitutional defects in yttrium aluminum garnet: first-principles study.
The atomistic structure, energetics, and electronic structure of single-substitutional Ce and La defects and double-substitutional Ce-La defects in Ce,La-codoped yttrium aluminum garnet (YAG) Y(3)Al(5)O(12) have been studied by means of first-principles periodic boundary conditions density functional theory calculations. Single substitution of Y by Ce or by La produces atomistic expansions arou...
متن کاملCerium Addition Improved the Dry Sliding Wear Resistance of Surface Welding AZ91 Alloy
In this study, the effects of cerium (Ce) addition on the friction and wear properties of surface welding AZ91 magnesium alloys were evaluated by pin-on-disk dry sliding friction and wear tests at normal temperature. The results show that both the friction coefficient and wear rate of surfacing magnesium alloys decreased with the decrease in load and increase in sliding speed. The surfacing AZ9...
متن کاملMixing and decomposition thermodynamics of c-Ti1-xAlxN from first-principles calculations
Abrikosov, Mixing and decomposition thermodynamics of c-Ti1-xAlxN from first-principles calculations, 2007, Physical Review B. We describe an efficient first-principles method that can be used to calculate mixing enthalpies of transition metal nitrides with B1 structure and substitutional disorder at the metal sublattice. The technique is based on the density functional theory. The independent ...
متن کاملOn the interplay between tungsten and tantalum atoms in Ni-based superalloys: An atom-probe tomographic and first-principles study
The partitioning behavior of W in a multicomponent Ni-based superalloy and in a ternary Ni–Al–W alloy is investigated using atom-probe tomography APT and first-principles calculations. APT observations indicate that whereas W partitions preferentially to the L12 -precipitates in the ternary alloy, its partitioning behavior is reversed in favor of the fcc -matrix in the multicomponent alloy. Fir...
متن کاملThermodynamic Prediction of the Liquidus, Solidus, and Ae3 Temperatures, and Phase Compositions for Low-alloy Multicomponent Steels
The vast majority of steel weld deposits solidify under highly nonequilibrium cooling conditions. A consequence of this is the chemical segregation of substitutional alloying elements during solidification, a segregation that persists as the weld cools to ambient temperature. Solidification-induced segregation of interstitials is usually not a problem due to the ease with which they can diffuse...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Proceedings of the National Academy of Sciences of the United States of America
دوره 106 8 شماره
صفحات -
تاریخ انتشار 2009