Chapter 2 NOISE ANALYSIS AND DESIGN IN DEEP SUBMICRON
ثبت نشده
چکیده
Traditionally, area-minimization and speed-maximization were the only factors relative to a design's effectiveness that were measured. Low power, high-throughput, and computationally intensive circuits are also critical application domains\ In addition to these three design parameters; area, speed, and power, there are two design metrics, which have been of great importance to current designs. These metrics are noise and reliability '̂" .̂ The five metrics are shown in Fig. 2-1 with an arrow associated to show whether this metric should be increased or decreased.
منابع مشابه
Modeling the Effect of Wire Resistance in Deep Submicron Coupled Interconnects for Accurate Crosstalk Based Net Sorting
It is well known that in deep submicron technologies the coupling capacitance between adjacent wires is a critical portion of the total wire capacitance, while at the same time the capacitance between wire and substrate has become the fringing component. High frequency signals travelling across multiple level interconnect structures generate proximity effects, i.e. crosstalk effects, between ad...
متن کاملHarmony: static noise analysis of deep submicron digital integrated circuits
As technology scales into the deep submicron regime, noise immunity is becoming a metric of comparable importance to area, timing, and power for the analysis and design of very large scale integrated (VLSI) systems. A metric for noise immunity is defined, and a static noise analysis methodology based on this noise-stability metric is introduced to demonstrate how noise can be analyzed systemati...
متن کاملDelay testing considering crosstalk-induced effects
The increased noise/interference effects, such as crosstalk, power supply noise, substrate noise and distributed delay variations lead to increased signal integrity problems in deep submicron designs. These problems can cause logic errors and/or performance degradation and need to be addressed both in the design for deep submicron and testing for deep submicron phase. Existing delay testing tec...
متن کاملSRAM Cell Performance in Deep Submicron Technology
This paper deals with the design opportunities of Static Random Access Memory (SRAM) for lower power Consumption and propagation delay .Here we have analyzed both read margin for read ability and write margin for SRAM write ability. Static Noise Margin affects both read margin and write margin. We have analyzed the Static Noise Margin using traditional butterfly method which requires the rotati...
متن کاملOptimization and Analysis Techniques for the Deep Submicron Regime
Scaling in the deep submicron (DSM) regime has fundamentally altered the primary issues affecting VLSI design. The emergence of DSM-related problems has resulted in a proliferation of design techniques that attempt to alleviate these newer effects in current flows. However, future design methodologies would be required to undergo a paradigm shift to comprehensively address these problems. A few...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017