Microstrip Bandpass Filters Based on Inductive-Coupled Stepped-Impedance Quarter-Wavelength Resonators
نویسندگان
چکیده
Inductive-coupling scheme for microstrip bandpass filters with quarter-wavelength steppedimpedance resonators is proposed. This is realized by a short-end stub which behaves as a K-inverter. It is investigated that the coupling coefficient of the resonators can be easily controlled by the length of the short-end stub. The filter has a compact size and good stopband rejection by employing the quarterwavelength stepped-impedance resonators. The design procedure of this kind of filter is provided. Two filters working at 2.4 GHz are designed and fabricated to demonstrate the proposed method.
منابع مشابه
Microstrip Cross-coupled Interdigital SIR Based Bandpass Filter
A simple and compact 4.9 GHz bandpass filter for C-band applications is proposed. This paper presents a novel microstrip cross-coupled interdigital half-wavelength stepped impedance resonator (SIR) based bandpass filter (BPF).The designed structure is similar to that of a combination of two parallel interdigital capacitors. The scattering parameters of the structure are measured using vector ne...
متن کاملMicrostrip Bandpass Filters Using End- Coupled Asymmetrical Step-impedance Resonators for Wide-spurious Response
This paper proposes asymmetrical step-impedance resonators bandpass filters (ASIRs) for suppressing a wide stopband, ensuing in size reduction and ease of fabrication. The filters have been designed at the operating frequency around 2.0 GHz using halfand quarter-wavelength asymmetrical step-impedance resonators. The concept of existent oddand even-mode characteristics is used to approve the pro...
متن کاملNovel Microstrip Bandpass Filters Using Direct-coupled Triangular Stepped-impeda- Nce Resonators for Spurious Suppression
This paper presents a novel spurious suppressed bandpass filter designed with triangular stepped-impedance resonators. The proposed resonators are folded for a triangular schematic, which creates two transmission zeros. By varying the line width of resonators, one of the zeros is tuned to suppress the first and second spurious responses, and the other is used to improve skirt selectivity. The c...
متن کاملCompact Dual-Band Bandpass Filter Based on Quarter Wavelength Stepped Impedance Resonators
This paper presents a compact dual-band bandpass filter that involves using the quarter wavelength stepped impedance resonators (SIRs) for achieving simultaneously compact circuit size and good dual-band performance. The filter is designed at 2.4 / 3.5 GHz and constructed by two pairs of quarter wavelength SIRs and source-load lines. By properly tuning the impedance ratio, length ratio and radi...
متن کاملThe Quasi-elliptic Bandpass Filter Using Quarter-wavelength Stepped Impedance Resonators
A bandpass filter is designed using two end-connected quarter-wavelength stepped impedance resonators. The quarter-wavelength stepped impedance resonators are implemented by a half-wavelength stepped impedance resonator with its middle shorting to ground. Hence, the modes that the λ/4 stepped impedance resonator supports are the (1+2n)/4 which also occur on the branches of a combline. An enhanc...
متن کامل