Testing of Gas-liquid Centrifugal Separation and Compression Technology at Demanding Operating Conditions
نویسنده
چکیده
Yuri Biba is a Staff Aero Performance Engineer with Dresser-Rand Company, in Olean, New York. He has been with the company since 1992, involved in turbocompressor selections, revamps and testing, focusing on aerodynamic design, analysis, performance prediction, and optimization of centrifugal compressor components. Dr. Biba received his M.Sc. degree in Aeronautical Engineering (with Honors, 1984) and Ph.D. degree in Mechanical Engineering (1987) from St. Petersburg State Polytechnic University, Russia. He has authored, presented and published technical papers on the subject of turbomachinery aerodynamics and is a member of ASME.
منابع مشابه
Design Optimization and Testing of Combined Centrifugal Separation and Compression Technology
The relatively new technology of rotary gas-liquid separation has been advanced by the development of a rotating centrifugal separator closely coupled to a centrifugal turbocompressor. This development by a major equipment manufacturer included the creation and calibration of an integrated design suite, and the use of this tool to optimize a separator/compressor stage. The compression and separ...
متن کاملPerformance Evaluation of a Centrifugal Compressor Operating under Wet Gas Conditions
This paper presents the results of performance testing of a single-stage centrifugal compressor operating under wet gas conditions. The test was performed at an oil and gas operator’s test facility and was executed at full-load and full-pressure conditions using a mixture of hydrocarbon gas and hydrocarbon condensate. The effect of liquid was investigated by changing the gas-volume fraction bet...
متن کاملDemonstration of the Rotordynamic Effects of Centrifugal Liquid Separation and Gas Compression in an Oil-free Integrated Motor-compressor
The application of oil-free-integrated motor-compressors has become increasingly popular in recent years. One of the significant features of this class of machinery is compactness, providing space-savings compared to traditional-oil-lubricated compressors with associated gearboxes and lubrication systems. The integration of a turbo separator with such a compressor has resulted in the creation o...
متن کاملDeasphalting of Olefin Pyrolysis Fuel Oil by Combination of Chemical–Physical Methods
This work investigates the effect of different conditions of PFO thermal cracking from two PFO samples on liquid, solid and gas product yield and asphaltene removal efficiency in a new designed experimental setup. No need to use a catalyst, simple operating system and experiment conditions, the ability to use water as a cheap carrier gas and high asphaltene extraction efficiency without the use...
متن کاملInvestigation of energy consumption reduction in multistage compression process and its solutions
During hot seasons the inlet temperature of Nitrogen increases, as a result compressor consumes more power for compressing a specific mass ratio of fluid and consequently total energy consumption of the compressor increases as well. In this research, a three stage centrifugal compressor with intercooler was modeled thermodynamically in order to decreases the energy consumption of the compressor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014