Effect of Electrode Surface Modification by Sulfide on QCM Based Protein Biosensor
نویسندگان
چکیده
The rapid development of surface sensitive biosensor technologies requires optimum control of surface modification to provide reliable and reproducible results. With the aim to assemble a quartz crystal microbalance (QCM)-based protein biosensor, we focus our attention on sulfide receptor and its integration with the surface of the electrode. Here, we present different surface modification processing time to allow sulfide molecules to be immobilized to gold coated sensor for QCM sensing. The optimum surface modification processing time is also obtained by bovine serum albumin (BSA) binding measurement.
منابع مشابه
A Novel Choline Biosensor Based on Immobilization of Enzyme Choline Oxidase on the β-Ga2O3 Nanowires Modified Working Electrode
This article is a report on a novel and high-stability biosensor with minor interference effects of surface modification of working electrode with β-Ga2O3 nanowires (NWs) on choline oxidase biosensor were investigated in an electrochemical detection system. β-Ga2O3 NWs were materialized on the silicon substrate in a catalyst-free growth mechanism. The β-Ga2O<sub...
متن کاملQCM Biosensor Based on Polydopamine Surface for Real-Time Analysis of the Binding Kinetics of Protein-Protein Interactions
A quartz crystal microbalance (QCM) biosensor based on polydopamine (PDA) surface was developed for real-time analysis of the binding kinetics of protein-protein interactions. The biosensor was fabricated by simply immersing the gold sensor chip into an aqueous dopamine solution at pH 8.5 leading to a spontaneous deposition of PDA film onto the sensor chip surface, which was followed by incubat...
متن کاملIn situ QCM DNA-biosensor probe modification
We report on a probe modification of a quartz crystal microbalance (QCM) DNA-biosensor that permits to reversibly change the DNA sequence detected. A QCM DNA-biosensor was designed by immobilization of a 20-base DNA-disulfide probe on the gold-covered quartz surface of a 27 MHz microbalance (9 MHz, third overtone). After immobilization on the gold covered quartz surface, this probe was modified...
متن کاملDNA Biosensor for Determination of 5-Fluorouracil based on Gold Electrode Modified with Au and Polyaniline Nanoparticles and FFT Square Wave Voltammetry
In the present study, a new biosensor for 5-Fluorouracil was described using modified goldelectrode and Fast Fourier transform square wave voltammetry (FFT SWV). Calf thymus DNAimmobilization was on a gold electrode decorated with polyaniline and gold nanoparticles. Theelectrochemical characteristics of the electrodes were investigated by cyclic voltammetry, andelectroch...
متن کاملModification of Glucose biosensor using Pt/MWCNTs electrode and optimization by application of taguchi method
In this paper, multi-wall carbon nanotubes (MWCNTs), gold nanoparticles (GNp) and glucose oxidase (GOD) was developed for the specific detection of glucose. MWCNTs were chemically modified with the H2SO4–HNO3 pretreatment to introduce carboxyl groups which were used to interact with the amino groups of poly(allylamine) (PAA) and cysteamine via 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hy...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013