Automated cold vapour flow-injection analysis of mercury at high concentrations

Automated continuous monitoring of inorganic and total mercury in wastewater and other waters by flow-injection analysis and cold-vapour atomic absorption spectrometry

An automated continuous monitoring system for the determination of inorganic and total mercury by flow-injection analysis followed by cold-vapour atomic absorption spectrometry is described. The method uses a typical flow-injection manifold where digestion and reduction of the injected sample takes place. Mercury is removed by aeration from the flowing stream in a specially designed air-liquid ...

Determination of total mercury in biological tissues by flow injection cold vapour generation atomic absorption spectrometry following tetramethylammonium hydroxide digestion.

A simple, rapid and reliable method was developed for the determination of total mercury in biological samples. Samples were solubilized using tetramethylammonium hydroxide (TMAH). The organically bound mercury was cleaved and converted to inorganic mercury by on-line addition of KMnO4. The decomposed mercury together with inorganic mercury originally present in samples was determined by flow i...

Determination of total mercury in bauxite and bauxite residue by flow injection cold vapour atomic absorption spectrometry

Inorganic, organic, and total mercury in blood and urine: cold vapor analysis with automated flow injection sample delivery.

A cold vapor atomic absorption technique for blood or urine mercury analysis that uses persulfate oxidation to prepare samples for total mercury analysis and acid permanganate oxidation to prepare samples for inorganic mercury analysis is described. The linearity of the procedures ranged from 0.5 to 25 micrograms/L. Precision ranged from 20% at 1 microgram/L to 7% at 20 micrograms/L. Documentat...

Adaptation of a cold vapour mercury analyser to flow injection analysis

Minor modifications to a Coleman MAS-50A Mercury Analyser System allowed the determination of mercury by flow injection analysis. Using sample volumes of 600 mul it was possible to analyse up to 120 samples per hour, with a detection limit of 0.2 mug. l(-1) (120 pg) of mercury. The authors also report on a simple digestion procedure which replaces the time- and reagent-consuming EPA procedure, ...