Gas-liquid hydrodynamics in Taylor Flows with complex liquids
ثبت نشده
چکیده
The obtained graphs of viscosity are extrapolated from the data of the rheometer, all graphs and data are shown in this appendix. First step to evaluate the viscosity of solution is to find the range of shear rate see Fig.67.
منابع مشابه
Computational Fluid Dynamic Modelling of Atomisation Processes in Turbulent Flows
Atomisation of liquids is frequently encountered in the liquid-gas flows used in many practical chemical and process engineering applications, and an ability to reliably predict such flows is of benefit to the optimisation and performance improvement of existing equipment and processes, as well as the evaluation of retrofit options and the design of new equipment, systems and plant. This paper ...
متن کاملExternal and Internal Incompressible Viscous Flows Computation using Taylor Series Expansion and Least Square based Lattice Boltzmann Method
The lattice Boltzmann method (LBM) has recently become an alternative and promising computational fluid dynamics approach for simulating complex fluid flows. Despite its enormous success in many practical applications, the standard LBM is restricted to the lattice uniformity in the physical space. This is the main drawback of the standard LBM for flow problems with complex geometry. Several app...
متن کاملFluid mechanics in fluids at rest.
Using readily available experimental thermophoretic particle-velocity data it is shown, contrary to current teachings, that for the case of compressible flows independent dye- and particle-tracer velocity measurements of the local fluid velocity at a point in a flowing fluid do not generally result in the same fluid velocity measure. Rather, tracer-velocity equality holds only for incompressibl...
متن کاملNew Approaches for Theoretical Estimation of Mass Transfer Parameters in Both Gas-Liquid and Slurry Bubble Columns
Bubble columns (with and without suspended solids) have been used widely as chemical reactors, bioreactors and equipment for waste water treatment. The key design parameters in bubble columns are: • gas holdup; • gas-liquid interfacial area; • volumetric liquid-phase mass transfer coefficient; • gas and liquid axial dispersion coefficients; Despite the large amount of studies devoted to hydrody...
متن کاملCFD Modeling of Gas-Liquid Hydrodynamics in a Stirred Tank Reactor
Multiphase impeller stirred tank reactors enhance mixing of reacting species used in a variety of chemical industries. These reactors have been studied based on Computational Fluid Dynamics (CFD) that can be used in the analysis, design and scale up of these reactors. Most of the researches done in this area are limited to single phase reactors, and a few remaining two phase flow investigat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010