Evaluation and Redesign of Simplified Decouplers Applied to a Tito Laboratory-scale Thermal Process
نویسندگان
چکیده
In this paper a procedure to evaluate and redesign simplified dynamic decouplers using relay-based experiment is applied to a TITO laboratory-scale thermal process. This procedures was originally proposed in (Acioli Júnior and Barros, 2011). The aim of the procedure is to reach effective decoupling at frequencies of interest for control purposes. Keywords— Decoupling Control, Simplified Decouplers, Relay Experiment Resumo— Neste trabalho, um procedimento de avaliação e reprojeto de desacopladores simplificados utilizando experimento baseado no relé é aplicado em um processo térmico de escala laboratorial com duas entradas e duas sáıdas. Esse procedimento foi originalmente proposto em (Acioli Júnior and Barros, 2011). O objetivo do procedimento é alcançar desacoplamento efetivo nas frequências de interesse para controle. Palavras-chave— Controle com Desacoplamento, Desacoplador Simplificado, Experimento do Relé
منابع مشابه
Tuning Decentralized Pid Controllers for Mimo Systems with Decouplers
In this paper, a method for controlling multivariable processes is presented. The controller design is divided into two parts: firstly, a decoupling matrix is designed in order to minimize the interaction effects. Then, the controller design is obtained for the process + decoupler block. For this purpose, an iterative numeric algorithm, proposed by same authors, is used. The aim is to meet the ...
متن کاملLean six sigma process improvement in specimen receiving to improve stat chemistry turnaround times
Objective: As a consequence of stat turnaround times (TATs) chronically exceeding 60 minutes, our laboratory was facing pressure to divert limited resources toward the implementation of an emergency department satellite laboratory. Peer-reviewed literature in clinical laboratory quality assurance and improvement indicates that between 60-70% of errors occur at the pre-analytical level. Thus...
متن کاملتأثیر طراحی خطوط مونتاژ بر اساس تکنیک‌های مهندسی بر بهره‌وری و فاکتورهای ارگونومی
Background and aims: In manual assembly industries, productivity could increase by scientific study, correct and accurate identification of activities and the time required for implementing each activity - with respect to the health, safety and human wellbeing. Although the positive effect of engineering interventions on the efficiency of production is evident, but its impact on the productivit...
متن کاملOn Designing of Membrane Thickness and Thermal Conductivity for Large Scale Membrane Distillation Modules
Membrane distillation has the potential to concentrate solutions to their saturation level, thus offering the possibility to recover valuable salts from the solutions. The process performance and stability, however, is strongly dependent upon the features of membranes applied. In addition, several other parameters, membrane thickness and thermal conductivity significantly affect the process per...
متن کاملFormation and Evaluation of Oxidation Behavior of Zirconia- Aluminide Coating on Nickel- Based Alloy
Practical applications of thermal barrier coatings with aluminide bond-coats are limited due to oxide scale spallation of the aluminide coating under applied thermal stresses. Considering the positive effects of oxygen-active elements or their oxides on the high temperature oxidation behavior, in this research zirconia was introduced into an aluminide coating. For this purpose, a Watts type bat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012