Tensile behavior of amorphous/nanocrystalline ZrCu/Cu multilayered films with graded interfaces
نویسندگان
چکیده
The microstructure and tensile response of amorphous ZrCu and nanocrystalline Cu multilayered thin films, with sharp or graded interfaces, are examined and analyzed. The extracted tensile properties of the multilayered films can be compared with the predicted values based on the iso-strain Rule of Mixture model. The multilayered films with graded interfaces, each about 50 nm thick, consistently exhibit higher tensile strength and elongation. This can be rationalized by the reduced stress and strain incompatibility along the interfaces. 2012 Elsevier Ltd. All rights reserved.
منابع مشابه
Tensile behavior of Al1 xMox crystalline and amorphous thin films
The exceptional strength and distinct deformation physics exhibited by pure ultrafine-grained and nanocrystalline metals in comparison to their microcrystalline counterparts have been ascribed to the dominant influence of grain boundaries in accommodating plastic flow. Such grain-boundary-mediated mechanisms can be augmented by additional strengthening in nanocrystalline alloys via solute and p...
متن کامل-
X-ray diffraction measurements were performed on Co?Pt1-?/Pd, Co/Pd, Co/Fe, and Co/W multilayer samples with different structures, such as Co?Pt1-? alloy layer composition ?, bilayer thickness, and number of bilayers. Multilayer samples were made by magnetron sputtering in a chamber with multi-parallel guns and a position controllable substrate. Co?Pt1-? alloy layers were deposited by cosputter...
متن کاملDuctile crystalline-amorphous nanolaminates.
It is known that the room-temperature plastic deformation of bulk metallic glasses is compromised by strain softening and shear localization, resulting in near-zero tensile ductility. The incorporation of metallic glasses into engineering materials, therefore, is often accompanied by complete brittleness or an apparent loss of useful tensile ductility. Here we report the observation of an excep...
متن کاملساخت فیلمهای بس لایهای Ni-Cu/Cu تهیه شده به روش الکتروانباشت و مطالعه نانوساختار آنها قبل و بعد از بازپخت
In this work electrodeposited Ni-Cu/Cu metallic multilayered films with different thicknesses of Ni and Cu were prepared on (100) polycrystalline Cu substrates. The nanostructure of the multilayers was studied using XRD. The existence of satellite peaks in the XRD patterns showed that the multilayered films have superlattice structures. The difference between the intensity of ML(200) and ML(11...
متن کاملThermal and tensile behavior of LLDPE films containing limited amounts of an oxo-biodegradable additive and/or amorphous poly(1-hexene) before and after UV irradiation
Varying amounts of an amorphous poly(1-hexene) (PH, Mv 1.7×106 Da) were added to an LLDPE matrix containing 3% w/w Addiflex oxo-biodegradable additive (HES-W) and extruded and converted into films. Then the effect of presence of PH was investigated on microstructure, thermal and tensile behavior of polymer films before and after 6 weeks of ultra violet irradiation (UVR). Due to UVR, ...
متن کامل