Experience with Superconducting Cavity Operation in the Tesla Test Facility
نویسنده
چکیده
A description of the TESLA Test Facility, which has been set up at DESY by the TESLA Collaboration, will be given. Measurements of the superconducting 9-cell cavities in vertical and horizontal test cryostats will be presented, as well as the experience with the first two accelerator modules in the TTF linac. Future cavity R&D efforts will be described.
منابع مشابه
The Vacuum System for the Superconducting Linac of the TESLA Test Facility
Among the different approaches towards a next generation 500 GeV e+elinear collider the TESLA design uses superconducting accelerating structures operating at 1.3 GHz with a gradient of 25 MV/m. Presently the TESLA Test Facility, which includes a prototype linear accelerator with superconducting cavities, is build up at DESY/Hamburg to serve as an R&D tool. First electrons have been accelerated...
متن کاملNew Possibilities for Superconducting Cavity Testing at Cornell University
Cornell is testing superconducting cavities for many different purposes: system development for CESR, supporting technology transfer of CESR SRF systems to storage ring light sources around the world, collaboration with the world-wide TESLA project, collaboration with Muon Collider/Neutrino Factory projects, developing an Energy Recovery Linac (ERL) based synchrotron light source in collaborati...
متن کاملPulsed Superconductivity Acceleration
The design of the proposed linear collider TESLA is based on 9-cell 1.3 GHz superconducting niobium cavities, operated in pulsed mode [1]. Within the framework of an international collaboration the TESLA Test Facility (TTF) has been set up at DESY, providing the infrastructure for cavity R&D towards higher gradients [2]. More than 60 ninecell cavities were tested, accelerating gradients as high...
متن کاملBeam Test of a Superconducting Cavity for the Fermilab High-brightness Electron Photo-injector
An electron photo-injector facility has been constructed at Fermilab for the purpose of providing a 14–18 MeV electron beam with high charge per bunch (8 nC), short bunch length (1 mm RMS), and small transverse emittance [1]. The facility was used to commission a second-generation photo-cathode RF gun for the TeSLA Test Facility (TTF) Linac at DESY [2, 3]; in the future, the Fermilab electron b...
متن کاملTesla-fel 2002-05
A design of a superconducting 3.9 GHz cavity for the injector of the TTF FEL-User Facility is presented. The cavity will be located after the first TESLA module with eight 1.3 GHz cavities and before the first bunch compressor. The purpose of the cavity is to cancel nonlinear distortions in the longitudinal phase space due to the cosine-like curvature of the 1.3 GHz accelerating cavity voltage....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1999