A High Precision Time-frequency Analysis Method

نویسندگان

  • Wenxin Zhang
  • Xiaojun Liu
  • Xiuwei Chen
  • Qing Liu
  • Guangyou Fang
چکیده

To analysis the signal whose frequency changes as time, this article presents a new time-frequency analysis method based on short-time fractional Fourier transform (FRFT) and integration of midpoints. This method uses window functions to divide the signal to many pieces, then the FRFT is used to calculate the frequency modulation (FM) rate of each piece. A chirp signal can be built based on the FM rate and the intermediate frequency (IF) signal is obtained by mixing the chirp signal and the primary signal. The frequency of the midpoints can be estimated by the chirp-z transform (CZT), therefore the frequency of every piece can be calculated. This method avoids the impact that the quick change of frequency leads to the error of short-time Fourier transform. It also can reduce the error brought by the estimation of chirp rate. Therefore, the method can improve the accuracy of time-frequency analysis. This article also puts forward a method to search the order of fractional Fourier transform, and the computer simulation and measurement verifies the effectiveness of the proposed algorithm.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Risk prediction based on a time series case study: Tazareh coal mine

In this work, the time series modeling was used to predict the Tazareh coal mine risks. For this purpose, initially, a monthly analysis of the risk constituents including frequency index and incidence severity index was performed. Next, a monthly time series diagram related to each one of these indices was for a nine year period of time from 2005 to 2013. After extrusion of the trend, seasonali...

متن کامل

Instantaneous frequency decomposition: an application to spectrally sparse sounds with fast frequency modulations.

Classical time-frequency analysis is based on the amplitude responses of bandpass filters, discarding phase information. Instantaneous frequency analysis, in contrast, is based on the derivatives of these phases. This method of frequency calculation is of interest for its high precision and for reasons of similarity to cochlear encoding of sound. This article describes a methodology for high re...

متن کامل

Application of Single-Frequency Time-Space Filtering Technique for Seismic Ground Roll and Random Noise Attenuation

Time-frequency filtering is an acceptable technique for attenuating noise in 2-D (time-space) and 3-D (time-space-space) reflection seismic data. The common approach for this purpose is transforming each seismic signal from 1-D time domain to a 2-D time-frequency domain and then denoising the signal by a designed filter and finally transforming back the filtered signal to original time domain. ...

متن کامل

Anharmonic Frequency Analysis

A new numerical method of frequency analysis is described, designed mainly to search for discrete frequencies in a time series. An integral transform is applied twice to the data for different reference times. A complex amplitude within a selected narrow frequency band is obtained for each transform. The frequency is then determined from the phase change of the complex amplitude over the differ...

متن کامل

Time Frequency Analysis of Higher Harmonic Generation in a Three Color Laser Pulse

high harmonic generation is a useful tool for the generation of short, intense attosecond pulses. In order to simulate high harmonic generation, we performed a numerical solution to the time dependent Schrödinger equation. by considering dipole approximation, we predicted generation of a 53 attosecond pulse. In order to see the time and frequency of emission of attosecond pulse, we exploit...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015