A theoretical analysis on the dynamic cleavage cracking in a constant-K specimen
نویسنده
چکیده
Through an energy analysis of the cleavage cracking in a constant-K sample, the analytical solution of the dynamic fracture resistance for a brittle, homogeneous material is obtained. The dependence of the crack behavior on the accumulated continuum dissipation associated with the dynamic effect is analyzed. The relationship between the critical energy release rate of crack arrest and the applied stress intensity factor is discussed in detail.
منابع مشابه
Nonlinear modeling of the infill wall based on the brittle cracking model
Abstract: This paper introduces a new numerical method for the analysis of infilled steel frames with hollow clay blocks. This approach is based on the brittle cracking model of ABAQUS. The results of the in-plane calibration analyses obtained with four experimental tests are presented and discussed. The first test was a bare steel frame used as a control specimen. The second was similar to ...
متن کاملIndustrial application of Instrumented DWTT in evaluating material resistance to ductile fracture for modern pipeline steels
CTOAC of typical X70, X80 and X90 pipeline steels plates were evaluated by using energy based regression method upon their single specimen. Clear difference in the material resistance to ductile cracking could be distinguished by the values of CTOAC and their characteristic fracture surface. The region of stable cracking on the fracture surface could be identified from the dynamic crack extensi...
متن کاملA Theoretical and Practical Study of Cracking of an Aluminium Alloy During Side Pressing Using a Finite - Element Analysis
Elastic-plastic finite-element analysis applied to metalforming allows the real macroscopic properties of the workpiece to be incorporated. This paper presents the results of an experimental study of the initiation of cracking in side-pressing of a heat-treated aluminium alloy (Duralloy 2014). Using an F. E. analysis, these are related to various fracture criteria. It is found that the criterio...
متن کاملAn Outrun Competition of Corrosion Fatigue and Stress Corrosion Cracking on Crack Initiation in a Compressor Blade
First row rotating blades of four axial-flow compressors were prematurely fractured. Previous investigations showed that the site atmosphere contains corrosive compounds which lead to an increase in possibility of pitting on the blades. It was also revealed that the crack was originated from two corrosion pits. Thus, this work is conducted to ascertain which of fatigue or stress corrosion crack...
متن کاملExperimental Investigations on Stretchability of an Austentic Stainless Steel 316L
The purpose of this investigation is to examine the viability of using the sheet metal for forming applications. Forming limit diagram (FLD) composed of negative and positive minor strain with respect to major strain which occurs at directional zero strain with the critical thickness of sheet metal. The negative minor strain region of FLD is predicted by localized necking. However there is no d...
متن کامل