Butter Separation from Cream Using Ultrasonication: Optimization of Parameters Using RSM

Authors

  • B. Maheshwari Department of Chemical Engineering, A. C. Tech Campus, Anna University, Chennai-600025, India.
  • N. Balasubramanian Department of Chemical Engineering, A. C. Tech Campus, Anna University, Chennai-600025, India.
  • R. Saravanathamizhan Department of Chemical Engineering, A. C. Tech Campus, Anna University, Chennai-600025, India.
Abstract:

Butter is separated from cream using ultrasonication method. The efficiency of butter preparation is evaluated with respect to various parameters such as time, dilution, fermentation time using ultrasonication at room temperature and compares the yield with conventional stirring method. All the parameters were critically studied and it is observed maximum yield was obtained for sonication time at 30 min, 1:10 dilution and the fermentation time of 18h. Experimental parameters for butter separation have been optimized for maximum yield of butter using Response Surface Methodology. It has been observed from the present analysis that the predicted values are in good agreement with the experimental data with a correlation coefficient of 0.956. It is also observed that the butter prepared from ultrasonication method produce higher yield, lesser time to produce butter and homogenized butter grains obtained compared to conventional method. The viscosity and pH are same when compared to commercial butter and having the fat content of 83.14 %.

Download for Free

Sign up for free to access the full text

Already have an account?login

similar resources

optimization of low-fat butter formulation according to its organoleptic properties using response surface methodology (rsm)

low-fat butter is water in oil emulsion comprising a continuous fat phase including butter, emulsifiers and colorants and also a dispersed aqueous phase including water, stabilizers and proteins. in this research, by using protein components especially full-fat soy flour, a product were produced which has extreme similarity to ordinary butter and also has good organoleptic properties. water : b...

full text

Optimization of Machining Parameters for cutting temperature on turning of Niobium alloy C-103by using RSM

Niobium based super alloys are an unusual class of metallic materials with an exceptional combination of high temperature strength, toughness, and resistance to degradation in corrosive or oxidizing environments. The focus of present work was to study the effect of cutting parameters – speed, feed and depth of cut on the machinability of Niobium C-103 under dry machining condition using respons...

full text

Optimization of Turning Parameters for Surface Roughness Using Rsm and Ga

The paper presents an experimental study of roughness characteristics of surface profile generated in CNC turning of AISI 1040 mild steel and optimization of machining parameters based on genetic algorithm. The three level rotatable central composite designs are employed for developing mathematical models for predicting surface roughness parameters. Response surface methodology is applied succe...

full text

Optimization of Biodiesel Production from Castor Oil Using a Microwave Via Response Surface Methodology (RSM)

The purpose of this research work was to investigate the optimum operating conditions for biodiesel production from castor oil using a microwave. The Box–Behnken design of experiment was carried out using the Design Expert 7. A response surface methodology (RSM) was used to analyze the influence of the process variables (molar ratio of methanol to castor oil, catalyst concentration, reaction ti...

full text

Preparation and Optimization of Esomeprazole Nanosuspension using Evaporative Precipitation– Ultrasonication

Purpose: To prepare and optimize esomeprazole nanosuspension to enhance drug dissolution rate. Methods: Esomeprazole nanosuspensions were prepared by evaporative precipitation-ultrasonication method using F68 (Poloxamer 188) and F127 (Poloxamer 407) as stabilizers. Formulation and process variables (concentration of stabilizers and drug, power input and duration of ultrasonication) affecting th...

full text

Convex Separation From Optimization Using Analytic Centers

Let K be a convex subset of Rn containing a ball of finite radius centered at c0 and contained in a ball of finite radius R. We give an oracle-polynomial-time algorithm for the weak separation problem for K given an oracle for the weak optimization problem for K. This is done by reducing the weak separation problem for K to the convex feasibility (nonemptiness) problem for a set K ′, and then b...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 08  issue 2

pages  1- 10

publication date 2018-07-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023