Mercury removal from aqueous solutions by palm leaves adsorbent
Authors
Abstract:
Mercury is a carcinogenic and teratogenic compound that tends to accumulate in water solutions. In this research, the removal of mercury from an aqueous solution was evaluated by using palm leaves. Experiments were performed to study the adsorption efficiency, the effect of the adsorbent amount, the balance time, the adsorbate concentration, and the pH on mercury removal. The experimental apparatus used was a batch stirred reactor (volume: 1m3). The study was conducted under almost isothermal conditions. The test results showed that the optimum adsorbate concentration was 2 g/l, the balance time was three hours, the optimum adsorbent concentration was 15 mg/l, and the pH was 6. The maximum efficiency obtained was 99.24%. The chemical compounds with the highest presence in the palm leaves were LoI (93.76%), and SiO2 (4.1%), whereas the compound with the lowest presence was Na2O (0.08%). The mercury removal efficiency increased with an increase in the adsorbent dose and the contact time, and reduced with an increase in the initial mercury concentration. The Freundlich model, using the variables provided in the study, predicted the change in the adsorption kinetics.
similar resources
Fluoride Removal from Aqueous Solutions by NaOH-Modified Eucalyptus Leaves
Introduction: Fluoride (F) and its compounds are widely used in industries in which fluoride overdose leads to various detrimental diseases. In this study the effect of NaOH-modified Eucalyptus leaves on fluoride removal from aqueous solutions as a natural adsorbent was investigated. Materials and Methods: The focus of this study was on the effects of parameters such as pH (2-12), initial conc...
full textRemoval of Mercury from Aqueous Solutions by Waste Brick
Mercury is one of the most toxic heavy metals present in aquatic systems, exhibiting a complex behaviour in the environment, where it may persist for decades after the source of pollution is stopped. Hence, it is important develop new techniques for its removal from the aquatic systems. In this context, a particularly promising line of research is the use of new materials capable of up taking m...
full textNanocrystalline Akaganeite as Adsorbent for Surfactant Removal from Aqueous Solutions
The present study presents the effective use of nanocrystalline akaganeite for the adsorption of an anionic (SDS), a cationic (CTAB), and a nonionic (tween80) surfactant from wastewater. Equilibrium experiments, as well as thermodynamic analysis, were performed. The maximum SDS adsorption occurs at the lowest pH value (5), the opposite is observed for CTAB (pH = 11), while for tween80, the chan...
full textremoval of mercury from aqueous solutions by waste brick
mercury is one of the most toxic heavy metals present in aquatic systems, exhibiting a complex behaviour in the environment, where it may persist for decades after the source of pollution is stopped. hence, it is important develop new techniques for its removal from the aquatic systems. in this context, a particularly promising line of research is the use of new materials capable of up taking m...
full textRemoval of Congo red dye from aqueous solutions by a low-cost adsorbent: activated carbon prepared from Aloe vera leaves shell
Background: Synthetic dyes have several harmful effects on human health as well as aquatic life. In this study, activated carbon (AV-AC), based on Aloe vera leaf shells, was used as a novel agricultural adsorbent, one that is low-cost and available for the removal of Congo red (CR) as a carcinogenic dye from aqueous solutions. Methods: In the batch system, the influence of different paramete...
full textMy Resources
Journal title
volume 5 issue 2
pages 101- 107
publication date 2017-05-01
By following a journal you will be notified via email when a new issue of this journal is published.
Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023