Simultaneous degradation and adsorption of cyanide using modified fly ASH and TiO2/UV

Authors

  • Hadi Rezaei Sanandaj Health Center AND Department of Environmental Health Engineering, School of Public Health, Kurdistan University of Medical Sciences, Sanandaj, Iran
  • Hooshyar Hossini Department of Environmental Health Engineering, School of Health, Kermanshah University of Medical Sciences, Kermanshah, Iran
  • Meghdad Pirsaheb Department of Environmental Health Engineering, School of Health, Kermanshah University of Medical Sciences, Kermanshah, Iran
  • Saeb Ahmadi Department of Chemical Engineering, School of Chemical Engineering, Tarbiat Modares University, Tehran, Iran
  • Shima Rezaei Department of Environmental Health Engineering, Environmental Health Research Center, Kurdistan University of Medical Sciences, Sanandaj, Iran
Abstract:

Due to the present water shortage and environmental problems associated with industrial effluent, investigation of novel treatment technologies is an essential approach. Being a highly toxic chemical of asphyxiating characteristics, cyanide is seen as a major environmental pollutant in a wide range of industrial effluents. The present study aimed to address the adsorption and photocatalytic degradation of cyanide using activated fly ash and TiO2/UV. To investigate the removal efficiency of cyanide, two sets of experiments were designed. First, cyanide was absorbed by activated fly ash and degraded via a photocatalytic process, individually. Second, simultaneous adsorption and degradation was examined. The removal efficiency of cyanide by modified fly ash (MFA), TiO2/UV, and their combination (MFA-TiO2/UV) was 76.1%, 81%, and 86.6%, respectively. Optimal conditions for the combination of activated fly ash AFA-TiO2/UV were contact time of 6 hours, temperature of 100 °C, and AFA: TiO2 ratio (w/w) of 1:1. Under these conditions, a maximum removal rate of 92.4% was obtained when 1.2 g of MFA/TiO2 was used with a pH value of 3 in the presence of UV light. Based on the results of cyanide removal, it can be concluded that the combination of adsorption and photocatalytic degradation with MFA-TiO2/UV can be utilized to improve the removal of cyanide from wastewater. 

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Photocatalytic removal of o-chlorophenol by Using a Mixture of Modified Fly Ash and TiO2 Nanoparticles

Abstract Background: Photocatalytic process is used as a suitable method for o-chlorophenol removal. In this study, the efficiency of a mixture of modified fly ash and TiO2 nanoparticles in photocatalytic removal of o-chlorophenol was evaluated. Methods: After acid washing of fly ash, the absorbent was oxidized with potassium permanganate. ...

full text

Thermal Stability and Adsorption of Mercury Compounds in Fly Ash

Fly ashes were collected from five power plants under two loads in China. The ashes were heated at four different temperatures, and mercury speciation was determined based on the release regular pattern of mercury with temperature. The mercury concentration, unburned carbon content and mean ash particle sizes were measured. The correlation of mercury capture and unburned carbon content, mean as...

full text

Adsorption of tungsten onto zeolite fly ash produced by hydrothermally treating fly ash in alkaline solution.

Fly ash (FA) was hydrothermally treated in an alkaline solution to produce zeolite fly ash (Z-FA). The properties of the FA and Z-FA were investigated. The amounts of tungsten (W) adsorbed onto the FA and Z-FA surfaces were evaluated. Z-FA was produced by hydrothermally treating FA in an alkaline solution. The specific surface area and pore volume of the Z-FA were greater than those of the FA. ...

full text

Naphthalene and o-Xylene Adsorption onto High Carbon Fly Ash

Adsorption is an effective remediation technique for petroleum hydrocarbons because of its ease of use and high efficiency. The utilization of high-carbon content industrial by-products in such applications can present significant economic and environmental advantages. In this study, batch adsorption tests and petrographic analyses were used to investigate the adsorption of two nonpolar petrole...

full text

synthesis of amido alkylnaphthols using nano-magnetic particles and surfactants

we used dbsa and nano-magnetic for the synthesis of amido alkylnaphtols.

15 صفحه اول

determination of olanzapine and thiourea using electrodes modified by dna and film of copper-cobalt hexacyanoferrate & investigation of electro-oxidation of some catechol derivatives in the presence of 4-phenylsemicarbazid

چکیده هدف از این کار بررسی الکترواکسیداسیون کتکول و مشتقات آن در حضور 4-فنیل سمی کاربامازید بوده است اکسیداسیون کتکولها ترکیبات نا پایدار کینونها را تولید می کنند که این ترکیبات می تواند در واکنش مایکل بعنوان پذیرنده نوکلئوفیل عمل نمایند. در ادامه اکسایش کتکولهای (a-c1) را درحضور 4-فنیل سمی کاربامازید در محلول آب/استونیتریل (90/10)بوسیله ولتامتری چرخه ای و کولن متری در پتانسیل ثابت مورد بررسی ...

15 صفحه اول

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 3  issue 3

pages  196- 203

publication date 2015-08-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023