عنوان ژورنال
روش های عددی در مهندسی (استقلال)
- درجه :علمی پژوهشی وزارت علوم
- issn :2228-7698
- ناشر :دانشگاه صنعتی اصفهان
شماره 1 تاریخ انتشار 2007-07
- Vibration and Stability of Axially Moving Plates by Standard and Spectral Finite Element Methods
- Velocity Profile and Reynolds Shear Stress in Overflow Gabion Dam Crest
- Evaluation of Earth Dam Behavior against Earthquake with respect to Dam Height and Constitutive Model of Dam Materials
- Optimization of Cathodic Protection on Offshore Structures
- Stability Criteria for Rectangular Plates Subjected to Intermediate and End Inplane Loads Using Spline Finite Strip Method
- An Improved Methodology for Measurement of Uninterrupted – Flow Capacity Affected by Pavement Condition
- Geotechnical Interaction of Piled Raft Foundations: Two Case Studies
- Seismic Behavior of 2D Semi-Sine Shaped Hills against Vertically Propagating Incident Waves
- Investigation of Some Properties and Durability of Concrete in Urumie Lake
- Investigation of Double-layer Grid Space Structurer Resistance to Progressive Collapse
- Coupled Flap-Lag-Torsional Vibration Analysis of Pre-twisted Non-uniform Helicopter Blades
- Numerical and Analytical Study of Natural Dry Cooling Tower in a Steam Power Plant
- Determination of Dynamic Instability Speed of an Unsweep Wing in Subsonic Flow Including Compressibility Effects
- Nusselt Number Measurement of Air Flow between Grooved Rotor and Stator of a Generator
- Inverse Kinematics Resolution of Redundant Cooperative Manipulators Using Optimal Control Theory
- Experimental Investigation of the Effect of Vertical Tail on the Flow Field and Aerodynamic Forces of a fighter Model
- Effect of Reduced Frequency on the Unsteady Aerodynamic Performance of a Wind Turbine Blade Section
- Evaluation of Sizing Press Mill Performance in Slab Width Reduction Using FE Simulation
- Optimalization of Die Shap and Flow Lines in Non-Linear Dies in Extrusion of Non-Circular Sections
- Study of Structural Changes in Cu-Ni-Zn Mixture in Producing of Nickel Silver Alloys by Mechanical Alloying
- Grafting of Maleic Anhydride onto Co)propylene-b-ethylene( by Extrusion Process: Measurement of Adhesion to Steel Surface
- Yarn Tension along Cone Winding using a Controlling Loop
- Effects of Valve Closing Law and Unsteady Friction Model on Damping Pressure Waves in a Network