تحلیل شناختی مشاغل با استفاده از CTA و کمی سازی آن به کمک روش FJAS در اتاق های کنترل یک صنعت پتروشیمی

نویسندگان

چکیده مقاله:

 Background and aims: Nature of the work in control rooms is such that it can be classified as sophisticated with high-cognitive load jobs and, therefore, the prevention of human error seems to be necessary. A nalysis of cognitive tasks is the first and important step for designing preventive programs. This study was conducted to identify, quantify and compare the cognitive requirements of different occupations in the control rooms of a petrochemical industry. Methods: In this cross-sectional and descriptive-analytical study, Cognitive Task Analysis (CTA) and Fleishman Job Analysis Survey (FJAS) methods were used. The samples were 20 expert control room operators from leaders, board operators and site operators with 40.9 ± 6.98 years of old and 17.05 ± 6.25 years of work experience, which voluntary participated in this study. The One-Way ANOVA and Tukey HSD tests were used for Statistical data analysis via SPSS version 17.  Results: Based on the results of HTA –as the first CTA phase- 8 subtasks in leadership, board operator and site operator tasks were recognized. In addition, 12 cognitive requirements were defined for studied tasks via CTA. The FJAS scores indicated that 70% of recognized requirements in CTA are in moderate to high levels (the FJAS mean score higher than 4) which obligates a relatively high cognitive ability to operators. The Tukey HSD test results revealed no significant difference in cognitive requirements level of leadership and board operator tasks, as well as board operators and site operators. However, it was significantly different between leadership and site operator tasks (P value <0.05).  Conclusion: This study indicated numerous and relatively, high level cognitive requirements of tasks in petrochemical control rooms, especially, among board operators. Moreover, due to the ability of scaling and analyzing various parameters, FJAS can be considered not only as a complementary but also as an alternative for CTA.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

تحلیل شناختی مشاغل با استفاده از cta و کمی سازی آن به کمک روش fjas در اتاق های کنترل یک صنعت پتروشیمی

زمینه و هدف: ماهیت کار در اتاق های کنترل به گونه ای است که جزء کارهای پیچیده و با بار شناختی بالا تلقی شده و پیشگیری از وقوع خطاهای انسانی در این مشاغل ضروری به نظر می رسد. تحلیل شناختی وظایف اولین و مهمترین اقدام در جهت طراحی برنامه های پیشگرانه بوده و این مطالعه با هدف تعیین نیازهای شناختی وظایف، کمی سازی آنها و مقایسه سطوح نیازمندی های شناختی در گروه های شغلی در اتاق های کنترل یک صنعت پتروشی...

متن کامل

واکاوی خطای انسانی اپراتورهای اتاق کنترل با استفاده از تکنیک HEART در یک مجتمع پتروشیمی

Background and aims Control room is a palpitating heart of a system, and any error in operator`s duties have irreparable consequences. Nowadays, in many work places such as nuclear industry, military and chemical parts human error can cause catastrophic event that led many events around the world, so the purpose of this study is analyzing human error in a utility unit control room of a Petroche...

متن کامل

مقایسه تأثیر وضعیت طاق باز و دمر بر وضعیت تنفسی نوزادان نارس مبتلا به سندرم دیسترس تنفسی حاد تحت درمان با پروتکل Insure

کچ ی هد پ ی ش مز ی هن ه و فد : ساسا د مردنس رد نامرد ي سفنت سرتس ي ظنت نادازون داح ي سکا لدابت م ي و نژ د ي سکا ي د هدوب نبرک تسا طسوت هک کبس اـه ي ناـمرد ي فلتخم ي هلمجزا لکتورپ INSURE ماجنا م ي دوش ا اذل . ي هعلاطم ن فدهاب اقم ي هس عضو ي ت اه ي ندب ي عضو رب رمد و زاب قاط ي سفنت ت ي هـب لاتـبم سراـن نادازون ردنس د م ي سفنت سرتس ي لکتورپ اب نامرد تحت داح INSURE ماجنا درگ ...

متن کامل

مطالعه ارگونومیک (شناسایی، پیش بینی و کنترل) خطاهای انسانی در یکی از اتاق های کنترل صنایع پتروشیمی با استفاده از روش SHERPA

Background and Aim: Today in many work environments, such as nuclear, military and chemical industries, human errors may result in disasters. Accidents in different parts of the world bear evidence to this examples are the Chernobyl disaster (1986), the Three Mile Island accident (1974), and the Flixborough explosion (1974). Thus, identification of human error, especially in complex and intrica...

متن کامل

ارزیابی کمی خطای انسانی با استفاده از رویکرد مهندسی در فرایند صدور پروانه کار در یک صنعت پتروشیمی

Background and aims: Permit to work (P.T.W) is a formal written system to control certain types of work which are identified as potentially hazardous. Although P.T.W is a means of safety system and coordinating different work activities to avoid conflicts, it may be susceptible for human error. The purpose of this study was quantitative human error assessment using engineering approach in P.T.W...

متن کامل

مطالعه خطاهای انسانی در یکی از اتاق های کنترل صنایع پتروشیمی توسط تکنیک CREAMبا رویکرد ارگونومی شناختی

Background and Aim: Today in most of the work environments, such as nuclear, military and chemical industries, human error may result in catastrophic events. A common characteristic of large technological systems is that massive amounts of potentially dangerous materials are kept in one single unit controlled by control room operators. A control room is indeed the heart of a system of this type...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 11  شماره 4

صفحات  20- 30

تاریخ انتشار 2014-11

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

کلمات کلیدی برای این مقاله ارائه نشده است

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023