2D Numerical Simulation of a Micro Scale Ranque-Hilsch Vortex Tube

نویسندگان

چکیده مقاله:

  In this study, fluid flow and energy separation in a micro-scale Ranque-HilschVortex Tube are numerically investigated. The flow is assumed as 2D, steady,compressible ideal gas, and shear-stress-transport SST k-W is found to be a bestchoice for modeling of turbulence phenomena. The results are in a good agreementwith the experimental results reported in the literature. The results show that fluidflow and energy separation inside the micro-scale vortex tube is quite similar tothose of traditional ones. Moreover, it is found that non-dimensional forms of coldtemperature difference and refrigerating capacity are only dependent on cold massfraction. In addition, two correlations have been proposed to estimate nondimensional forms of cold temperature difference and refrigeration capacity in themicro-scale vortex tube.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

2d numerical simulation of a micro scale ranque-hilsch vortex tube

in this study, fluid flow and energy separation in a micro-scale ranque-hilschvortex tube are numerically investigated. the flow is assumed as 2d, steady,compressible ideal gas, and shear-stress-transport sst k-w is found to be a bestchoice for modeling of turbulence phenomena. the results are in a good agreementwith the experimental results reported in the literature. the results show that flu...

متن کامل

Maxwell's demon in the Ranque-Hilsch vortex tube.

A theory was developed that explains energy separation in a vortex tube, known as one of the Maxwellian demons. It appears that there is a unique relation between the pressures in the exits of the vortex tube and its temperatures. Experimental results show that the computed and measured temperatures are in very good agreement.

متن کامل

Performance Evaluation of a Ranque-Hilsch Vortex Tube with Optimum Geometrical Dimensions

 A brass Vortex Tube (VT) with interchangeable parts is used to determine the optimum cold end orifice diameter, main tube length and diameter. Experim...

متن کامل

Experimental Evaluation of a Ranque- Hilsch Vortex Tube as a Particle Separator

R & D Journal of the South African Institution of Mechanical Engineering 2012,28,25-30 http://www.saimeche.org.za (open access) © SAIMechE All rights reserved. 25 The Pebble Bed Modular Reactor (PBMR) is a Generation IV graphite-moderated helium cooled nuclear reactor developed in South Africa from the German Arbeitsgemeinschaft Versuchreaktor (AVR). After decommissioning of the AVR plant, radi...

متن کامل

A new approach to selective brain cooling by a Ranque-Hilsch vortex tube

BACKGROUND Target temperature management is the single most effective intervention and the gold standard in post-resuscitation care today. However, cooling the whole body below 33-34 °C can cause severe complications. Therefore, developing a selective brain cooling (SBC) approach which can be initiated early to induce rapid cooling and maintain the target temperature over 12-24 h before slowly ...

متن کامل

Review of Ranque–Hilsch effects in vortex tubes

The vortex tube or Ranque–Hilsch vortex tube is a device that enables the separation of hot and cold air as compressed air flows tangentially into the vortex chamber through inlet nozzles. Separating cold and hot airs by using the principles of the vortex tube can be applied to industrial applications such as cooling equipment in CNC machines, refrigerators, cooling suits, heating processes, et...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 2  شماره 1

صفحات  39- 48

تاریخ انتشار 2015-04-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023