A New Robust Control Design Based on Feedback Compensator for Sssc

نویسندگان

چکیده مقاله:

In this paper, the modified linearized Phillips-Heffron model is utilized to theoretically analyze asingle-machine infinite-bus (SMIB) installed with SSSC. Then, the results of this analysis are used forassessing the potential of an SSSC supplementary controller to improve the dynamic stability of apower system. This is carried out by measuring the electromechanical controllability through singularvalue decomposition (SVD) analysis. This controller is tuned for simultaneously shifting theundamped electromechanical modes to a prespecifed area in the s-plane. The issue of designing arobustly SSSC- based controller is considered and formulated as an optimization problem accordingto the eigenvalue-based multi-objective function consisting of the damping ratio of the undampedelectromechanical modes and the damping factor. Next, considering its high capability to find themost optimistic results, the Gravitational Search Algorithm (GSA) is used to solve this optimizationproblem. Wide ranges of operating conditions are considered in design process of the proposeddamping controller in order to guarantee its robustness. The effectiveness of the proposed controlleris demonstrated through eigenvalue analysis, controllability measure, nonlinear time-domainsimulation and some performance indices studies. The results show that the tuned GSA based SSSCcontroller which is designed by using the proposed multi-objective function has an outstandingcapability in damping power system low frequency oscillations, also it significantly improves thepower systems dynamic stability.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Robust Control Design Technique for Discrete-Time Systems

A robust state feedback design subject to placement of the closed loop eigenvalues in a prescribed region of unit circle is presented. Quantitative measures of robustness and disturbance rejection are investigated. A stochastic optimization algorithm is used to effect trade-off between the free design parameters and to accomplish all the design criteria. A numerical example is given to illustra...

متن کامل

Assessment of the conventional control algorithms and proposing a modified displacement feedback control for performance-based design of structures

An enhanced displacement feedback structural control procedure is presented for performance-based design in this paper. At first, a comparative study is implemented assessing three most common active control algorithms including state, acceleration, and displacement feedback controls. The advantage of the displacement feedback algorithm for active control of structures against earthquakes is de...

متن کامل

Power Line Compensation Study of a Static Synchronous Series Compensator (SSSC) based on s

This paper discusses a Static Synchronous Series Compensator which is constructed with a 48-pulse inverter. Extensive simulation studies are carried out to verify the proper operation of the mentioned Flexible AC Transmission Systems (FACTS) device. In MATLAB simulation environment the designed device is connected to a power system that is comprised of three phase power source, transmission lin...

متن کامل

A new control strategy for SSSC to improve low-frequency oscillations damping

When power systems are expanded and connected together with weak tie lines, the low-frequency oscillations are increased and the stability margin of the power system decreases. Therefore, when designing the transmission system to be used, it is necessary to maintain the dynamic stability of the power system, and to make sure to have the most possible stability margin. SSSC is a FACTS device con...

متن کامل

A new control strategy for SSSC to improve low-frequency oscillations damping

When power systems are expanded and connected together with weak tie lines, the low-frequency oscillations are increased and the stability margin of the power system decreases. Therefore, when designing the transmission system to be used, it is necessary to maintain the dynamic stability of the power system, and to make sure to have the most possible stability margin. SSSC is a FACTS device con...

متن کامل

A Robust Dispersion Control Chart Based on M-estimate

Process control charts are proven techniques for improving quality. Specifying the control limits is the most important step in designing a control chart. The presence of outliers may extremely affect the estimates of parameters using classical methods. Robust estimators which are not affected by outliers or the small departures from the model assumptions are applied in this paper to specify th...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 2  شماره 7

صفحات  54- 65

تاریخ انتشار 2013-11-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023