A Novel Interleaved DC-DC Converter with Reduced Loss for Fuel Cell Vehicle Application

نویسندگان

  • B. Asaei School of Electrical and Computer Engineering, University of Tehran, Tehran, Iran.
  • M. Khalilzadeh School of Electrical and Computer Engineering, University of Tehran, Tehran, Iran.
  • M. R. Nikzad School of Electrical and Computer Engineering, University of Tehran, Tehran, Iran.
چکیده مقاله:

In this paper a novel four-leg interleaved DC-DC boost converter is proposed which is well suitable for fuel cell vehicles (FCV) application. The voltage stress of two switches of this converter is half of the conventional interleaved converters. Therefore, smaller and cheaper switches can be utilized. Also "on" state duration of the two of four switches are reduced in comparison with conventional converter. Furthermore, comparing the losses of the proposed converter to conventional one – which is used in ،Toyota Mirai 2015 – shows a significant loss reduction in full power range. The proposed converter is simulated within an FCV in urban and highway driving cycles using ADVISOR software. The results show that the average power loss of the converter is improved about 32% in urban cycle and about 17% in highway cycle comparing to conventional one.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Application of High Voltage Ratio and Low Ripple Interleaved DC-DC Converter for a Fuel Cell

This paper proposes a high voltage ratio and low ripple interleaved boost DC-DC converter, which can be used to reduce the output voltage ripple. This converter transfers the low DC voltage of fuel cell to high DC voltage in DC link. The structure of the converter is parallel with two voltage-doublers boost converters by interleaving their output voltages to reduce the voltage ripple ratio. Bes...

متن کامل

Average Model of a High Frequency DC-DC Converter for Fuel Cell Application in Electrical Vehicle

In this paper a high frequency DC-DC converter fed by fuel cell is analyzed. The converter consists of full bridge inverter connected to full bridge rectifier through two planar transformers and parallel resonant. The mathematical model of the fuel cell is first presented and the average model of the converter is elaborated. The developed model is used to study the characteristics and dynamics ...

متن کامل

A High Voltage Ratio and Low Ripple Interleaved DC-DC Converter for Fuel Cell Applications

This paper proposes a high voltage ratio and low ripple interleaved boost DC-DC converter, which can be used to reduce the output voltage ripple. This converter transfers the low DC voltage of fuel cell to high DC voltage in DC link. The structure of the converter is parallel with two voltage-doubler boost converters by interleaving their output voltages to reduce the voltage ripple ratio. Besi...

متن کامل

A Quarantine DC/DC Converter using High- Frequency Unstructured LLC Resonant Converter for Fuel Cell Application

This paper suggests an isolated dc/dc converter using an unregulated LLC converter for fuel cell applications. The LLC converter operates as an isolated voltage amplifier with a constant voltage gain, and a nonisolated converter installed in the input stage regulates the output voltage under a wide variation of fuel cell stack voltage. By separating the functions, the unregulated LLC converter ...

متن کامل

High Step-Up Interleaved DC/DC Converter Using VM Cell for PV Applications

This work proposes a high step-up interleaved dc/dc topology utilizing a VM (voltage multiplier) cell suitable for PV applications. The VM cells D/C (Diode/Cap.) are cascaded among the phases to approach a high voltage gain. Besides, the voltage converting ratio of the presented structure can be improved by extending the VM cells and it also leads to drop in the normalized voltage stress throug...

متن کامل

Two Phase Interleaved Dc- Dc Converter

This paper presents a high-efficiency nonisolated interleaved dc–dc inductor boost converter with a common active clamp circuit. Interleaved boost converters are highly preferred as it reduces the ripple current. A boost converter is used to clamp the voltage stresses of all the switches in the interleaved converter which is caused by the leakage inductances. The leakage energies of the interle...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 13  شماره 1

صفحات  89- 99

تاریخ انتشار 2017-03

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023