A numerical and experimental study on buckling and post-buckling of cracked plates under axial compression load

نویسندگان

  • A. M. Majd Sabeti Department of Mechanical Engineering, Shahrood University of Technology, Shahrood, Iran
  • H. Gharooni Department of Mechanical Engineering, Shahrood University of Technology, Shahrood, Iran
  • M. Shariati Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
چکیده مقاله:

Existence of cracks in industrial structures is one of the important causes of their failure, especially when they are subjected to important axial compressive forces that might lead to buckling. Therefore, it must be considered in stress analysis and designing and loading of such structures. In this paper, the buckling and post-buckling behaviors of stainless-steel cracked plates under axial compression load were investigated both experimentally and numerically and effects of the geometrical and mechanical parameters, such as crack length, crack angle, crack position, plate imperfection, load band, and plate thickness on the critical buckling load were studied. In the experimental study, mechanical properties and plastic behavior of stainless steel plates were determined for the subsequent numerical study. Numerical modeling was carried out by ABAQUS finite element software. Numerical predictions were compared with the experimental results and the reliability of the numerical solution was proven. Results demonstrated the considerable effects of the mentioned parameters on the critical buckling load of plate.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

a numerical and experimental study on buckling and post-buckling of cracked plates under axial compression load

existence of cracks in industrial structures is one of the important causes of their failure, especially when they are subjected to important axial compressive forces that might lead to buckling. therefore, it must be considered in stress analysis and designing and loading of such structures. in this paper, the buckling and post-buckling behaviors of stainless-steel cracked plates under axial c...

متن کامل

Experimental and Numerical Analysis of the Critical Buckling Load of Cracked Sheets

Collapse by buckling a quite common phenomenon in sheets under pressure. When these structures caused by defects such as corrosion and cracks the time of the occurrence of this phenomenon is sensitive and critical load to be significantly reduced. Therefore, in this article sheet of aluminum Al 1200 by cracks in a part of the sheet will be considered. Left angle on the critical buckling load ef...

متن کامل

Curvature Effects on Thermal Buckling Load of DWCNT Under Axial Compression Force

In this article, curvature effects on elastic thermal buckling of double-walled carbon nanotubes under axially compressed force are investigated using cylindrical shell model. Also, the small scale effect is taken into account in the formulation. The dependence of the interlayer van der Waals (vdW) pressure on the change of the curvatures of the inner and outer tubes at that point is considered...

متن کامل

Buckling of cracked cylindrical thin shells under combined internal pressure and axial compression

Linear eigenvalue analysis of cracked cylindrical shells under combined internal pressure and axial compression is carried out to study the effect of crack type, size and orientation on the buckling behavior of cylindrical thin shells. Two types of crack are considered; through crack and thumbnail crack. Our calculations indicate that depending on the crack type, length, orientation and the int...

متن کامل

Numerical and Experimental Study of Buckling of Rectangular Steel Plates with a Cutout

Steel plates are used in various structures, such as the structures of the deck and body of ships, bridges, and aerospace industry. In this study, we investigate the buckling and post-buckling behavior of rectangular steel plates having circular cutouts with two boundary conditions: first, clamped supports at upper and lower ends and free supports at other edges; second, clamped supports at upp...

متن کامل

On the buckling of cracked composite cylindrical shells under axial compression

Potential sensitivity of the buckling behavior of cracked composite cylindrical shells to service life cracking is explored by carrying out linear buckling analysis. Computational models of cracked composite cylindrical shells are developed by exploiting a special meshing scheme in which the element size is reduced incrementally from the element size employed in the uncracked region by approach...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 4  شماره 1

صفحات  43- 54

تاریخ انتشار 2014-09-11

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023