An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes

نویسندگان

  • Alireza Mashayekhi Nano-fabricated Energy Devices Laboratory, School of Electrical and Computer Engineering, College of Engineering, University of Tehran, Tehran, Iran.
  • Seyed Ali Safiabadi Tali Nano-fabricated Energy Devices Laboratory, School of Electrical and Computer Engineering, College of Engineering, University of Tehran, Tehran, Iran.
  • Seyed Mahmoud Hosseini Nano-fabricated Energy Devices Laboratory, School of Electrical and Computer Engineering, College of Engineering, University of Tehran, Tehran, Iran.
  • Zeinab Sanaee Nano-fabricated Energy Devices Laboratory, School of Electrical and Computer Engineering, College of Engineering, University of Tehran, Tehran, Iran.
چکیده مقاله:

Lithium ion batteries are among the most used rechargeable batteries in the world. Carbon nanostructures including carbon nanotubes (CNTs) are considered as important electrode materials for this kind of batteries. Therefore improving the performance of these carbon based electrodes in Lithium ion batteries is an important issue and attracts much attention in the battery community. In this manuscript, a new method for high content Nitrogen doping on CNTs is reported as an efficient approach for enhancing the battery performance. Direct current-plasma enhanced chemical vapor deposition (DC-PECVD) system was used for nitrogen doping. Annealing with Nitrogen during CNT growth and plasma exposure after the growth has been used for Nitrogen doping of the CNTs. The growth was performed on an Indium Tin oxide (ITO) covered Silicon substrate. Implementation of Silicon substrate enables the possibility of future integration of other electronic circuits with the fabricated Lithium ion battery. Vertically aligned CNTs with an average diameter of around 150 nm and 4 um height has been obtained on this substrate. The synthesized CNTs was subsequently used as the electrode of Lithium ion battery in a half cell configuration. The results show a significant improvement of about 400% in the specific capacity of the battery as a result of Nitrogen doping. For Nitrogen doped CNT based battery, specific capacity of around 0.4 mAh/cm2 and coulombic efficiency of 97% were achieved after 28 cycles of charge/discharge with C rate of 2.5. This Nitrogen doping method is propped as an efficient technique for enhancing the performance of Lithium ion batteries with carbon based electrodes.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Nanostructured Lithium-Aluminum Alloy Electrodes for Lithium-Ion Batteries

Electrodeposited aluminum films and template-synthesized aluminum nanorods are examined as negative electrodes for lithium-ion batteries. The lithium-aluminum alloying reaction is observed electrochemically with cyclic voltammetry and galvanostatic cycling in lithium half-cells. The electrodeposition reaction is shown to have high faradaic efficiency, and electrodeposited aluminum films reach t...

متن کامل

CNT@TiO2 nanohybrids for high-performance anode of lithium-ion batteries

This work describes a potential anode material for lithium-ion batteries (LIBs), namely, anatase TiO2 nanoparticle-decorated carbon nanotubes (CNTs@TiO2). The electrochemical properties of CNTs@TiO2 were thoroughly investigated using various electrochemical techniques, including cyclic voltammetry, electrochemical impedance spectroscopy, galvanostatic cycling, and rate experiments. It was revea...

متن کامل

Metal hydride-based materials towards high performance negative electrodes for all-solid-state lithium-ion batteries.

Electrode performances of MgH2-LiBH4 composite materials for lithium-ion batteries have been studied using LiBH4 as the solid-state electrolyte, which shows a high reversible capacity of 1650 mA h g(-1) with an extremely low polarization of 0.05 V, durable cyclability and robust rate capability.

متن کامل

Kinetic characteristics of mixed conductive electrodes for lithium ion batteries

The rate performances of four mixed conductive electrodes (Li4/3Ti5/3O4, LiFePO4, LiCoO2 and LiCo1/3Ni1/3Mn1/3O2) were investigated using alvanostatic charge/discharge, electrochemical impedance Spectroscopy (EIS) and galvanostatic intermittent titration (GITT). These four electrode aterials can be roughly divided into two groups according to the structure change during Li intercalation/extract...

متن کامل

Improvement of charge/discharge performance for lithium ion batteries with tungsten trioxide electrodes

batteries with tungsten trioxide electrodes W. Li1, A. Sasaki1,3, H. Oozu3, K. Aoki3, K. Kakushima2, Y. Kataoka2, A. Nishiyama2, N. Sugii2, H. Wakabayashi2, K. Tsutsui2, K. Natori1, H. Iwai1 Tokyo Tech. FRC 1, Tokyo Tech IGSSE 2, Toshiba Material Co., LTD, Introduction The charge/discharge time of rechargeable lithium ion batteries (LIBs) is becoming increasingly important in evaluating the per...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 52  شماره 1

صفحات  78- 83

تاریخ انتشار 2019-06-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023