Calculation of MnO Activity in Aluminate Slags at Various Temperatures

نویسندگان

  • E. Keshavarz Alamdari Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, P.O. Box 15875-4413, Tehran, Iran.
  • L. Erfani Ceramic Department, Materials and Energy Research Center (MERC), P.O. Box 14155-4777, Tehran, Iran.
  • Y. Ganjkhanloo Research Center for Materials and Mining Industries Technology, Amirkabir University of Technology, P.O. Box 15875-4413, Tehran, Iran.
چکیده مقاله:

In this research, the activity of MnO, produced during steel making in aluminate-rich slags, was investigated. According to thermodynamic equations and mathematical calculation, a series of relations was obtained for evaluation of oxide activity using Masson’s theory. The obtained relations were solved according to Levenberg- Marquardt method and using Matlab software. The results were correlated with the experimental Data. To derive relations, it was assumed that the solution has ideal behavior and the polymeric chains are linear. Finally, a relation was derived for oxide activity calculation which can be used in a wide range of concentration. MnO activity was investigated at various temperatures, using the experimental data and the obtained relation. Furthermore, the relation between equilibrium constant (K) and temperature was obtained. By means of the results the viscosity of melt can also be forecasted.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

calculation of mno activity in aluminate slags at various temperatures

in this research, the activity of mno, produced during steel making in aluminate-rich slags, was investigated.according to thermodynamic equations and mathematical calculation, a series of relations was obtained forevaluation of oxide activity using masson’s theory. the obtained relations were solved according to levenberg- marquardt method and using matlab software. the results were correlated...

متن کامل

Electronic/Ionic Properties of FexO–SiO2–CaO–Al2O3 Slags at Various Oxygen Potentials and Temperatures

Electrochemical nature of metallurgical reaction arouses more and more attentions, and the most closely related is the electrical conductivity of molten slag. The electrical conductivity of molten slag is not only an important physical property that plays a prominent role in modeling and operating the electric smelting furnace and optimizing the metallurgical process, but also important for und...

متن کامل

The Hydration Products of a Refractory Calcium Aluminate Cement at Low Temperatures

Calcium aluminates (CA) are the most important hydraulically setting cements used for preparing refractory castables, because they develop high strength at very early ages after placements.  The anhydrous phases of this kind of cements are CA, CA2 and traces of C12A7 and alpha-alumina. The major hydraulic phase in all of the CA cements including ciment fondu...

متن کامل

The Hydration Products of a Refractory Calcium Aluminate Cement at Intermediate Temperatures

The major hydraulic phase in all the calcium aluminate cements including ciment fondue is CA (CaAl2O4). Once hydrated, it starts to form the hexagonal crystals of CAH10 and C2AH8 that depending on the time and temperature of hydration convert to the cubic crystals of C3AH6 and AH3. The nature, sequence, ...

متن کامل

Solubility of Naproxen in Polyethylene Glycol 200 + Water Mixtures at Various Temperatures

The solubility of naproxen in binary mixtures of polyethylene glycol 200 (PEG 200) + water at the temperature range from 298.0 K to 318.0 K were reported. The combinations of Jouyban-Acree model + van’t Hoff and Jouyban-Acree model + partial solubility parameters were used to predict the solubility of naproxen in PEG 200 + water mixtures at different temperatures. Combination of Jouyban-Acree m...

متن کامل

Solubility of Naproxen in Polyethylene Glycol 200 + Water Mixtures at Various Temperatures

The solubility of naproxen in binary mixtures of polyethylene glycol 200 (PEG 200) + water at the temperature range from 298.0 K to 318.0 K were reported. The combinations of Jouyban-Acree model + van’t Hoff and Jouyban-Acree model + partial solubility parameters were used to predict the solubility of naproxen in PEG 200 + water mixtures at different temperatures. Combination of Jouyban-Acree m...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 8  شماره 2

صفحات  24- 26

تاریخ انتشار 2011-07-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023