Cladding of stellite composite on carbon steel by gas tungsten arc welding (GTAW)

نویسندگان

  • F. Ashrafizadeh Department of Materials Engineering, Isfahan University of Technology, Isfahan, 841568311, Iran
  • F. Madadi Department of Materials Engineering, Isfahan University of Technology, Isfahan, 841568311, Iran
  • M. Shamanian Department of Materials Engineering, Isfahan University of Technology, Isfahan, 841568311, Iran
چکیده مقاله:

This paper deals with the investigation of the microstructure and hardness of steel samples cladded with satellite 6-WC composites by using gas tungsten arc welding (GTAW) process. For this purpose, steel samples were coated with unreinforced and reinforced stellite (by 20, 30 and 40 wt.% WC). The cladded samples were evaluated by metallographic studies, microhardness measurement and X-ray diffraction analysis. In order to reduce dilution and to increase the hardness, samples were coated by two layers of similar chemical composition. The results indicated that in samples cladded by reinforced stellite, with an increase in tungsten carbide content, the amount of hypoeutectic phase (γ + (γ + WC)) increased. This is accompanied by an increase in hardness.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

cladding of stellite composite on carbon steel by gas tungsten arc welding (gtaw)

this paper deals with the investigation of the microstructure and hardness of steel samples cladded with satellite 6-wc composites by using gas tungsten arc welding (gtaw) process. for this purpose, steel samples were coated with unreinforced and reinforced stellite (by 20, 30 and 40 wt.% wc). the cladded samples were evaluated by metallographic studies, microhardness measurement and x-ray diff...

متن کامل

Gas tungsten arc welding

Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding, is an arc welding process that uses a nonconsumable tungsten electrode to produce the weld. The weld area is protected from atmospheric contamination by a shielding gas (usually an inert gas such as argon), and a filler metal is normally used, though some welds, known as autogenous welds, do not require it. A const...

متن کامل

Optimization of gas tungsten arc welding (GTAW) to develop the NiAl coating using neural networks and genetic algorithm

In this research, artificial neural network (ANN) and genetic algorithm (GA) were used in order to produce and develop the NiAl intermetallic coating with the best wear behavior and the most value of hardness. The effect of variations of current, voltage and gas flow on the hardness and wear resistance were optimized by ANN and GA. In the following, the optimum  values of current, voltage and g...

متن کامل

Modeling of Transport Phenomena in Gas Tungsten Arc Welding of Ni to 304 Stainless Steel

This study investigates transport phenomena in the weld pool (WP) of gas tungsten arc (GTA) welding of Nickel to 304 stainless steel. A finite element 3D simulation of fluid flow and heat transfer of spot welding without consumable is accomplished which leads to prediction of the weld zone shape, weld penetration and dilution of alloying elements. The model includes magneto-hydrodynamics (MHD),...

متن کامل

Optimization of gas tungsten arc welding (GTAW) to develop the NiAl coating using neural networks and genetic algorithm

In this research, artificial neural network (ANN) and genetic algorithm (GA) were used in order to produce and develop the NiAl intermetallic coating with the best wear behavior and the most value of hardness. The effect of variations of current, voltage and gas flow on the hardness and wear resistance were optimized by ANN and GA. In the following, the optimum  values of current, voltage and g...

متن کامل

Vibration Assisted Robotic Hot-wire Gas Tungsten Arc Welding (gtaw) for Additive Manufacturing of Large Metallic Parts

Most of the metal additive manufacturing technologies are focused on high cost and high end applications. There is in need, a low cost additive manufacturing technology suitable for low and high end metallic applications. Robotic automated welding can be considered as an alternative to manufactured large scale metal parts with layer by layer approach. However, many obstacles have to be overcome...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 6  شماره 2

صفحات  34- 37

تاریخ انتشار 2009-12-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023