Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire

نویسندگان

  • Mohammad Reza Khalili Center of research for advanced and smart materials and structures, K.N Toosi University of Technology, Tehran, Iran
  • Morteza Rajabpour Young Researchers and Elite Club, Semnan Branch, Islamic Azad University, Semnan, Iran
  • Roham Maher Faculty of Engineering, Postgraduate School, South Tehran Branch, Islamic Azad University, Tehran, Iran
چکیده مقاله:

This paper presents an experimental investigation into the compression behavior of shape memory alloy hybrid composites (SMAHC) subjected to quasi-static loading taking into account of rotation effects of shape memory wire in basalt continuous filament (BCF) direct roving epoxy composite. Two types of specimen prepared, the BCF direct roving reinforced epoxy composite filled with shape memory wire and BCF direct roving reinforced epoxy composite without shape memory wire and compression strengths of two specimens per type are analyzed. Specimens were prepared by hand layup at room temperature for curing. For composites specimen four layer BCF direct roving reinforced epoxy composite prepared. The effect of shape memory wire on the maximum load bearing capacity of resultant specimens after quasi static damage was experimentally investigated. Results of compression test for two specimens per type of BCF and SMAHC showed that composite specimens with four layer BCF direct roving reinforced epoxy composite has higher load than SMAHC specimens with rotate wire between second and third layer. It may for weak interface between shape memory wire and matrix due to the discrepancy in compatibility of materials.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Development and characterization of epoxy syntactic foam filled with epoxy hollow spheres

The present study focuses on the development and characterization of epoxy syntactic foam filled with epoxy hollow spheres (ESF/EHoS). The epoxy syntactic foam (ESF) was produced by embedding epoxy hollow spheres (EHoS) into a mixture of epoxy-hardener and 3% KOH solution. An innovative approach and simple procedure was implemented in the preparation of the EHoS where expanded polystyrene (EPS)...

متن کامل

Continuous Heating of a Hollow Cylinder*

7. The essence of the method of characteristics is the following. Suppose the flow is to be determined in the channel of Fig. 4 and the flow is known up to the line I. Select points A and B on line I. At these points the velocity, the direction of flow, etc., is known. Thus characteristics Ca and Cb can be drawn. Equation (17) used along the two different characteristics gives two equations for...

متن کامل

Analysis of Hollow Fiber Temperature Sensor Filled with Graphene-Ag Composite Nanowire and Liquid

A hollow fiber temperature sensor filled with graphene-Ag composite nanowire and liquid is presented and numerically characterized. The coupling properties and sensing performances are analyzed by finite element method (FEM) using both wavelength and amplitude interrogations. Due to the asymmetrical surface plasmon resonance sensing (SPR) region, the designed sensor exhibits strong birefringenc...

متن کامل

Axisymmetric Vibration of Piezo-Lemv Composite Hollow Multilayer Cylinder

Axisymmetric vibration of an infinite piezolaminated multilayer hollow cylinder made of piezoelectric layers of 6mm class and an isotropic LEMV Linear Elastic Materials with Voids layers is studied. The frequency equations are obtained for the traction free outer surface with continuity conditions at the interfaces. Numerical results are carried out for the inner, middle, and outer hollow piezo...

متن کامل

Dispresion Analysis in a Fluid–Filled and Immersed Transversely Isotropic Thermo–Electro–Elastic Hollow Cylinder

The dispersion analysis in a fluid filled and immersed thermo–electro elastic hollow cylinder composed of homogeneous, transversely isotropic material is studied within the frame work of linear theory of elasticity. The motions of the cylinder are formulated using the constitutive equations of a transversely isotropic piezo–thermo elastic material with a preferred material direction collinear w...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 4  شماره 3

صفحات  225- 232

تاریخ انتشار 2017-12-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023