Computational Simulation of Ablation Phenomena in Glass-filled Phenolic Composites

نویسندگان

  • Abbas Jafari Jaid Iranian Institute of Research and Development in Chemical Industries (IRDCI), Iranian Academic Center for Education, Culture and Research (ACECR), P. O. Box 13145-1494, Tehran, I.R. IRAN
  • Behnaz Aghaaliakbari Iranian Institute of Research and Development in Chemical Industries (IRDCI), Iranian Academic Center for Education, Culture and Research (ACECR), P. O. Box 13145-1494, Tehran, I.R. IRAN
  • Mir Ali Asghar Zeinali Iranian Institute of Research and Development in Chemical Industries (IRDCI), Iranian Academic Center for Education, Culture and Research (ACECR), P. O. Box 13145-1494, Tehran, I.R. IRAN
چکیده مقاله:

A one–dimensional, transient and thermal degradation model for predicting responses of composite materials when are exposed to the fire is presented. The presented model simulates ablation of composites with different layers of materials and considers material properties as functions of temperature. The reactions are modeled by using Arrhenius-type parameters and density-temperature diagrams which are obtained by specific experimental techniques such as thermogravimetric analysis. This transient thermal model has been implemented in form of a computer code by means of new numerical methods in order to predict the temperature distribution in the liner, the amount of char and erosion, and the liner thickness variations with time. By using implemented computer code, ablation phenomena in a glass-filled phenolic composite has been simulated with the same parameters of a similar experiment. The results are in a good agreement with the experimental data and the model can successfully be used in the design of thermal protection shields as an aid of material and thickness selection.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

computational simulation of ablation phenomena in glass-filled phenolic composites

a one–dimensional, transient and thermal degradation model for predicting responses of composite materials when are exposed to the fire is presented. the presented model simulates ablation of composites with different layers of materials and considers material properties as functions of temperature. the reactions are modeled by using arrhenius-type parameters and density-temperature diagrams wh...

متن کامل

CHARACTERIZATION OF SHORT E-GLASS FIBER REINFORCEDGRAPHITE AND BRONZE FILLED EPOXY MATRIX COMPOSITES

The mechanical characterization of short E- glass fiber reinforced, graphite and sintered bronze filled epoxy composite was carried out in this study. The aim of the present study was to develop tribological engineering material. In this study the flexural strength, theoretical and experimental density, Hardness and Impact strength of composites was investigated experimentally. The results show...

متن کامل

simulation of pultrusion manufacturing process of glass/polyester composites

present research involves the complete simulation of pultrusion manufacturing process of glass/polyester composites. for that purpose, the curing process is divided to two liquid and gel-solid phases. the physical characteristics of the resin consist of specific heat, viscosity and coefficient of heat transfer changes with variations of temperature and increasing the degree of curing process (α...

متن کامل

A Numerical Method for the Determination of an Effective Modules for Coated Glass Fibers Used in Phenolic Composites

It is well known that the mechanical properties of fiberglass reinforced "phenolic moulding compounds" are significantly enhanced if the glass particles are coated with silane coupling agents before compounding. It has been shown that improvements obtained by using scanning electron microscopy techniques are due to better bonding of phenolic resin to the surface of treated glass fibers. These o...

متن کامل

Fine compact - filled composites

Objectives. The aim of this study was to compare a large set of resin composites suitable for application in stress-bearing areas on the basis of their consistency. Methods. A variety of posterior resin composites were tested using an apparatus that was originally designed for determination of the consistency of elastomeric impression materials (ISO 4823,1992)*The consistency of a standardized ...

متن کامل

Ultrafine midway filled composites

Objectives. The aim of this study was to compare a large set of resin composites suitable for application in stress-bearing areas on the basis of their consistency. Methods. A variety of posterior resin composites were tested using an apparatus that was originally designed for determination of the consistency of elastomeric impression materials (ISO 4823,1992)*The consistency of a standardized ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 34  شماره 1

صفحات  97- 106

تاریخ انتشار 2015-03-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023