Control capability of electrolytic concentration on refractive index and dielectric constant of porous Silicon layers

نویسندگان

  • J. Natarajan Nanoscience Research Lab, Department of Physics, VHNSN College (Autonomous), Virudhunagar, 626 001, India.
  • P. Jeyaprakash Nanoscience Research Lab, Department of Physics, VHNSN College (Autonomous), Virudhunagar, 626 001, India.
  • P. Natarajan Nanoscience Research Lab, Department of Physics, VHNSN College (Autonomous), Virudhunagar, 626 001, India.
  • S. Amirtharajan Nanoscience Research Lab, Department of Physics, VHNSN College (Autonomous), Virudhunagar, 626 001, India.
چکیده مقاله:

Porous Silicon (PS) samples have been prepared by electrochemical anodization of p-type silicon wafer by varying HF concentrations in the electrolytic solution. The structural, surface morphological, optical and surface composition analysis of the prepared samples were done by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Photoluminescence (PL) and Fourier transform infrared (FTIR) spectroscopy studies respectively. The grain sizes of PS were determined by XRD study. The porosity of PS samples was estimated by using the parameters obtained from the SEM images by the geometrical method. The porosity of the samples was found to vary between 11% and 84% due to the variation in HF concentration in the electrolytic solution. The refractive index and dielectric constant values of PS as a function of porosity were determined by Effective Medium Approximation methods. Strong visible emission peak at 498 nm, with no apparent shift with respect to variation in etching parameter, is observed in Photoluminescence study. The surface bonding and their vibration modes of the PS were determined by transmission FTIR spectroscopy.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

control capability of electrolytic concentration on refractive index and dielectric constant of porous silicon layers

porous silicon (ps) samples have been prepared by electrochemical anodization of p-type silicon wafer by varying hf concentrations in the electrolytic solution. the structural, surface morphological, optical and surface composition analysis of the prepared samples were done by x-ray diffraction (xrd), scanning electron microscopy (sem), photoluminescence (pl) and fourier transform infrared (fti...

متن کامل

Influence of current density on refractive index of p-type nanocrystalline porous silicon

Porous Silicon (PS) layers have been prepared from p-type silicon wafers of (100) orientation. SEM, XRD, FTIR and PL studies were done to characterize the surface morphological and optical properties of PS. The porosity of the PS samples was determined using the parameters obtained from SEM images by geometric method. The refractive index values of the PS samples as a function of poros...

متن کامل

Influence of current density on refractive index of p-type nanocrystalline porous silicon

Porous Silicon (PS) layers have been prepared from p-type silicon wafers of (100) orientation. SEM, XRD, FTIR and PL studies were done to characterize the surface morphological and optical properties of PS. The porosity of the PS samples was determined using the parameters obtained from SEM images by geometric method. The refractive index values of the PS samples as a function of poros...

متن کامل

Porous Silicon Gradient Refractive Index Micro-Optics.

The emergence and growth of transformation optics over the past decade has revitalized interest in how a gradient refractive index (GRIN) can be used to control light propagation. Two-dimensional demonstrations with lithographically defined silicon (Si) have displayed the power of GRIN optics and also represent a promising opportunity for integrating compact optical elements within Si photonic ...

متن کامل

Stability of low refractive index PECVD silicon oxynitride layers

Low refractive index Silicon Oxynitride (SiON) layers were deposited by Plasma Enhanced Chemical Vapor Deposition (PECVD) using SiH4/N2 and N2O. At an index less than 1.473 the as-deposited layers appeared to be unstable in time and sensitive to moisture as could be observed by a spectroscopic ellipsometer. The stability, probably due to partly open structures, could be improved by deposition a...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 6  شماره 3

صفحات  315- 322

تاریخ انتشار 2015-07-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023