Design of a Low-Latency Router Based on Virtual Output Queuing and Bypass Channels for Wireless Network-on-Chip

نویسندگان

  • Ahmad Khademzadeh Education and International Scientific Cooperation Department, Iran Telecommunication Research Center, Tehran, Iran
  • Farhad Rad Department of Computer Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
  • Midia Reshadi Department of Computer Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
چکیده مقاله:

Wireless network-on-chip (WiNoC) is considered as a novel approach for designing future multi-core systems. In WiNoCs, wireless routers (WRs) utilize high-bandwidth wireless links to reduce the transmission delay between the long distance nodes. When the network traffic loads increase, a large number of packets will be sent into the wired and wireless links and can easily fill FIFO queues at the input ports of routers. In these conditions, head-of-line (HOL) blocking and node congestion may occur and the network communications efficiency tremendously decreases. In this study, a low-latency router was proposed, which employs virtual output queuing (VOQ) and bypass channels to eliminate the congestion of routers and improves network performance. Synthetic traffic patterns were simulated using Noxim simulator and obtained results show that considerable improvement in the latency, total energy consumption and the saturation throughput can be achieved compared to the other WiNoCs.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Congestion estimation of router input ports in Network-on-Chip for efficient virtual allocation

Effective and congestion-aware routing is vital to the performance of network-on-chip. The efficient routing algorithm undoubtedly relies on the considered selection strategy. If the routing function returns a number of more than one permissible output ports, a selection function is exploited to choose the best output port to reduce packets latency. In this paper, we introduce a new selection s...

متن کامل

Design of Efficient Router with Low Power and Low Latency for Network on Chip

The NoC consists of processing element (PE), network interface (NI) and router. This paper proposes a hybrid scheme for Netwok of Chip (NoC), which aims at obtaining low latency and low power consumption by concerning wired and wireless links between routers. The main objective of this paper is to reduce the latency and power consumption of the network on chip architecture using wireless link b...

متن کامل

Design of a router for network-on-chip

In this paper, we present several enhanced network techniques which are appropriate for VLSI implementation and have reduced complexity, high throughput and simple routing algorithm even if basic network problems such as deadlock and livelock are considered. We develop a new packet definition to support different requirements in an MIMD message passing architecture and also verify its efficienc...

متن کامل

application of upfc based on svpwm for power quality improvement

در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...

15 صفحه اول

A Low Latency and Power ASIC Design of Modular Network Interfaces for Network on Chip

The implementation of a high-performance Network on Chip (NoC) requires an efficient design of the network interface (NI) unit that connects the switched network to the IP cores. However, different interfaces’ specification of integrated components and different flow control is used by NoC router raises a considerable difficulty for adopting NoC techniques. The architecture of NIs must be modul...

متن کامل

Area and Power Efficient Router Design for Network on Chip

As network on chip (NoC) systems become more prevalent in today’s industry. Routers and interconnection networks are the main components of NoC. Therefore, there is a need to obtain low area and power models for these components so that we can better understand the area and power tradeoffs. In this paper a lowarea and power efficient NoC architecture is proposed by eliminating the virtual chann...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 8  شماره 2

صفحات  179- 196

تاریخ انتشار 2019-12-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023