Ductility Evaluation of Prestressed Concrete Members

نویسندگان

  • A.R. Khaloo
  • and P. Bagheri
چکیده مقاله:

In this paper, moment-curvature behavior and ductility of prestressed concrete members based on nonlinear analysis is investigated. Influence of various design parameters on ductility of flexural members is determined according to appropriate materials models for stress-strain curves of concrete, prestressing steel and conventional reinforcements. Parameters studied include reinforcing index (ω ̅), compressive steel ratio, type of prestressing steel and cross-sectional shape of members. The reinforcing index is the most influential parameter on ductility of prestressed members. This variable contains the influence of several other parameters, such as compressive strength of concrete and reinforcing ratio, and links prestressed, ordinary reinforced and partially prestressed concrete sections. For maximum permissible reinforcing index of 0.36β1 based on ACI design code, curvature ductility is between 1.5 to 3.0 and for ω ̅=0.2, which is the maximum value allowed for moment redistribution, ductility is greater than 4.0, and for ω ̅ less than 0.1, a ductility of greater than 10.0 is achievable. Influence of magnitude of ultimate strength of prestressing steel and cross-sectional shape on ductility is insignificant. Confinement has considerable effect on ductility.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

ductility evaluation of prestressed concrete members

in this paper, moment-curvature behavior and ductility of prestressed concrete members based on nonlinear analysis is investigated. influence of various design parameters on ductility of flexural members is determined according to appropriate materials models for stress-strain curves of concrete, prestressing steel and conventional reinforcements. parameters studied include reinforcing index (ω...

متن کامل

Ductility of Prestressed and Partially Prestressed Concrete Beam Sections

D analyses of structures responding elastically to ground motions recorded during severe earthquakes have shown that the theoretical response inertia loads are generally significantly greater than the static design lateral loads recommended by codes. Hence, structures designed for the lateral earthquake loads recommended by codes can only survive severe earthquakes if they have sufficient ducti...

متن کامل

Ductility of Confined Concrete

Are structural engineers designing concrete structures with greater capacity and safety than they realize? By exploring effects of confinement in order to incorporate them in usual design procedures of engineering consulting companies, concrete structures will possibly in the future be both stronger, thinner and have a greater ability to deform prior to failure – three properties that are highl...

متن کامل

Prestressed Concrete Piles

A state of the art presentation on prestressed piling as used throughout the world is discussed in this General Report to the FIP Symposium on Mass-Produced Prestressed Precast Elements in Madrid, Spain, May 1968. Historical information, design data and notes along with manufacturing techniques, installation practices, discussion of problems and failures and a complete bibliography are all cove...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 18  شماره 1

صفحات  61- 79

تاریخ انتشار 1999-04

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023