Effect of annealing process on microstructure and mechanical properties of high manganese austenitic TWIP steel

نویسندگان

  • A. Kermanpur Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran
  • A. Najafizadeh Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran
  • M. Karkeh Abadi Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran
  • Y. Mazaheri Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran
چکیده مقاله:

In the present study, the influence of annealing temperature on mechanical properties and the microstructure of a high manganese austenitic steel (Fe-30Mn-4Al-4Si-0.5C) was investigated. X-ray diffractometry, optical and scanning electron microscopy, hardness and tensile tests were used to analyze the relationship between mechanical properties and microstructure after annealing process. The results indicated an optimum combination of strength and elongation under the condition of high cold rolling reduction with subsequent annealing in the partial recrystallization region.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

effect of annealing process on microstructure and mechanical properties of high manganese austenitic twip steel

in the present study, the influence of annealing temperature on mechanical properties and the microstructure of a high manganese austenitic steel (fe-30mn-4al-4si-0.5c) was investigated. x-ray diffractometry, optical and scanning electron microscopy, hardness and tensile tests were used to analyze the relationship between mechanical properties and microstructure after annealing process. the res...

متن کامل

TWIP-effect and thermo-mechanical treatment of a stable high-manganese austenitic stainless steel

Austenitic carbon steels that exhibit excellent mechanical properties due to the twinning-induced plasticity effect have been studied extensively. On the other hand, austenitic stainless steels usually achieve good strength and ductility via transformation-induced plasticity. However, relying on martensite transformation for strength may cause problems such as delayed cracking. Therefore, the t...

متن کامل

The Influence of Homogenization and Solution Annealing Process on the Microstructure and Mechanical Properties of 1.4470 Ferritic-austenitic Stainless Steel

In the present research, the effect of the homogenization process and annealing temperature were investigated for the 1.4470 ferritic-austenitic stainless steel in the as-cast condition. In this regard, microstructural evolutions, hardness, and impact energy of the steel was evaluated with different heat treatment conditions. The results show that the minimum volume fraction of austenite phase ...

متن کامل

The Effect of Deformation Temperature on the Mechanical Properties and Microstructural Evolutions of High Manganese TWIP Steel

In this study, the effect of tensile test temperature (148 to 673 K) on the microstructural evolutions and the mechanical properties of high manganese twinning induced plasticity (TWIP) steel with the chemical composition of Fe- 31Mn-3Al-3Si (wt. %) was investigated. XRD, SEM and TEM were used to study the microstructural evolutions. Stacking fault energy (SFE) of the alloy was also calculated ...

متن کامل

effect of aluminum addition on the microstructure and mechanical properties of high manganese austenitic steel fe-18mn-0.6c

in this research, the effect of 2.3 wt.% aluminum addition on the microstructure and tensile properties of high manganese austenitic steel fe-18mn-0.6c was studied. for this purpose, the samples were investment cast, homogenized and hot rolled. tensile testing was carried out at ambient temperature. microstructural investigations and fractography on the steel samples were carried out using an o...

متن کامل

the effect of deformation temperature on the mechanical properties and microstructural evolutions of high manganese twip steel

in this study, the effect of tensile test temperature (148 to 673 k) on the microstructural evolutions and the mechanicalproperties of high manganese twinning induced plasticity (twip) steel with the chemical composition of fe-31mn-3al-3si (wt. %) was investigated. xrd, sem and tem were used to study the microstructural evolutions.stacking fault energy (sfe) of the alloy was also calculated by ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 8  شماره 1

صفحات  1- 4

تاریخ انتشار 2011-07-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023