Effects of Substrate Solution pH, Incubation Temperature, and Calcination Temperature on Bacterial Synthesis of Nano-Crystalline Hydroxyapatite
نویسندگان
چکیده مقاله:
این مقاله چکیده ندارد
منابع مشابه
LOW TEMPERATURE MOLTEN SALT SYNTHESIS OF NANO CRYSTALLINE MgAl2O4 POWDER
Abstract: composition of MgO and nano boehmite. The reactant and potassium chloride, as the reaction media, were fired at800-1000 °C at different dwell times (0.5-5 h) in the ambient atmosphere. After washing and filtration, the spinel nanopowder was characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) techniques. It was demonstrated tha...
متن کاملHydrophilicity of Silica Nano-Porous Thin Films: Calcination Temperature Effects
In this research work, silica nano-porous thin films were deposited on glass substrates by layer by layer method. The thin films were calcinated at various calcination temperatures (200, 300, 400, and 500 °C). The morphology, surface characteristics, surface roughness and hydrophilic properties of the thin films were investigated by field emission scanning electron microscopy, attenuated total ...
متن کاملsynthesis of amido alkylnaphthols using nano-magnetic particles and surfactants
we used dbsa and nano-magnetic for the synthesis of amido alkylnaphtols.
15 صفحه اولEffects of pH and Temperature on Oilfield Scale Formation
Water flooding is one of the most influential methods for pressure maintenance and enhanced oil recovery. However, water flooding is likely to develop the formation of oilfield scale. Scale formation in reservoirs, due to the mixing of injection water and formation water, could cause formation damage and production limit. Therefore, it is necessary to simulate the compatibility of brine and inj...
متن کاملEffects of calcination temperature on the pore size and wall crystalline structure of mesoporous alumina.
In this paper, mesoporous alumina with different pore sizes and wall crystalline structures was synthesized at calcination temperatures over 550 degrees C. The characterization of the samples calcined at 550, 800, 1100, and 1300 degrees C, respectively, was performed using TEM, XRD, FTIR, TG/DTA, and N2 adsorption/desorption techniques. The correlation between pore size and wall crystalline str...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 27 شماره 2
صفحات 213- 226
تاریخ انتشار 2009-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023