Experimental Investigation and Analysis of Manufacturing Wind Turbine Blades Produced by Hydroforming of Aluminum Alloy AA5754

نویسندگان

  • Hamed Bakhtiarizade Department of Mechanical Engineering, Iran University of Science &Technology, Tehran, Iran
  • Mohsen Shahmoradi Department of Mechanical Engineering, Maleke-ashtar University of Technology, Isfahan, Iran
چکیده مقاله:

Development of new technologies and combined with creativity and innovation, plays the fundamental role in developing of any community′s value. Thus, in this research the design and production of hydroforming device was introduced. One of the best and most efficient technologies in the world of metal forming is wind turbine blade producing with hydroforming method which seems as an innovative manner in this field. The aim of this paper is design a small wind turbine blade. Application of this blade is for spaces with size limitation and building large-scale wind turbines. The first step of design process involves choosing and determining the airfoil blade wind turbine, distributing along the radius, angle of the airfoil and chording length distribution along the radius. Turbine blades modeled in CATIA software and transferred to finite element software, ABAQUS. Critical blades points under the hydrostatic pressure have been identified and outputs such as displacement, Von Misses stress obtained from hydroforming simulation process. In the final stage, after ensuring the software outputs blade has been modeled and produced.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

experimental investigation and analysis of manufacturing wind turbine blades produced by hydroforming of aluminum alloy aa5754

development of new technologies and combined with creativity and innovation, plays the fundamental role in developing of any community′s value. thus, in this research the design and production of hydroforming device was introduced. one of the best and most efficient technologies in the world of metal forming is wind turbine blade producing with hydroforming method which seems as an innovative m...

متن کامل

Experimental Investigation of Thermal Conductivity of Aluminum Alloy 3003 Produced by Equal Channel Angular Rolling Process

Equal channel angular rolling (ECAR) process is one of the methods that have been used to make ultra-fine materials by imposing severe plastic deformation. After repeating the process several times, a large effective strain is applied to the sample that can cause decreasing the grain size and improving the mechanical and physical properties of the metal. In this study, thermal conductivity of t...

متن کامل

Experimental Investigation of Thermal Conductivity of Aluminum Alloy 3003 Produced by Equal Channel Angular Rolling Process

Equal channel angular rolling (ECAR) process is one of the methods that have been used to make ultra-fine materials by imposing severe plastic deformation. After repeating the process several times, a large effective strain is applied to the sample that can cause decreasing the grain size and improving the mechanical and physical properties of the metal. In this study, thermal conductivity of t...

متن کامل

Investigation of waviness in wind turbine blades: Structural health monitoring

Waviness in composite wind turbine blades was detected and characterized with the help of air coupled ultrasonics. Based on the aspect ratio, the detected marcels are either accepted or rejected. A passive structural health monitoring approach has been presented here to monitor the accepted marcels above a threshold. The fatigue life of specimen is most affected in the presence of a marcel. Hen...

متن کامل

The Parameters Investigation and Hardness Optimization of A380 Aluminum Alloy produced by Mechanical Vibrator

The use of aluminum alloys in various industries, especially the automotive industries, to have less structural weight, is on the rise. The use of semi-solid forming process in addition to changes in the microstructure which improves the mechanical properties can reduce the volume of production and ultimately lead to the improvement of the structural weight. In this paper, optimization of the g...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 5  شماره 2

صفحات  69- 79

تاریخ انتشار 2016-05-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023