Flow Stress Modeling in a γ-γ/ Cobalt Base Superalloy by Using the Hyperbolic Sine Equation and ANN Method

نویسندگان

  • H. Arabi School of Materials and Metallurgical Engineering, Iran University of Science and Technology (IUST), Narmak, Tehran, Iran.
  • S. Ali Akbari Sani Department of Materials Science and Engineering, Iran University of Sience and Technology, Tehran, Iran
  • S. Kheirandish School of Materials and Metallurgical Engineering, Iran University of Science and Technology (IUST), Narmak, Tehran, Iran
چکیده مقاله:

The new class of wrought γ-γ/ Co-base superalloys, which are based on Co-Al-W system,  was developed by conventional hot working routes with a high volume fraction of γ/ precipitates and good mechanical properties. The aim of the present study was to predict the flow stress and hot deformation modeling of a novel γ-γ/ Co-base superalloy. The hot compression tests were carried out over a wide range of temperatures (950°C-1200°C) and strain rates (0.001s-1-1s-1). The flow stress analysis, constitutive approach and microstructure characterization revealed that dynamic recrystallization (DRX) occurred at a high temperature regime (1100°C-1200°C) but not at a low one (950°C-1050°C) due to the presence of γ/ precipitates. The hot deformation characteristic was studied using the hyperbolic sine equation on each of the above-mentioned regimes and the ANN approach on the overall conditions. The constitutive method indicated good potential for the prediction of the flow stress at each separated regime, but the ANN model represented a much more appropriate performance. The outstanding predictability of the ANN model regardless of the γ/ phase participation during the thermomechanical processing under the overall deformation conditions can be considered as another achievement of the proposed approach.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The effect of cobalt addition on the meso-porous structured γ-Alumina synthesized by aqueous sol-gel method

In the present study, the gamma alumina (γ-Al2O3) nano powders have been prepared with addition of 1%mol Co using an aqueous sol-gel method at lower temperature than the pure gamma alumina. The synthesis process accomplished by partial hydrolysis of the aqueous solution of metallic ions Al3+ and Co2+, with ammonia. The Al(NO3)3.9H2O and Co(NO3)2.6H2O salts were used as cations sources. The obta...

متن کامل

Prediction of foundations behavior by a stress level based hyperbolic soil model and the ZEL method

In shallow foundations, the third bearing capacity factor, N, has been found to show a decreasing tendency with increasing the foundation size. It is supported by experimental observations and related mainly to stress level dependent nature of the soil. On the other hand, the bearing capacity is often obtained theoretically without consideration of the foundation vertical displacements. In thi...

متن کامل

Fuzzy Γ-Hyperideals in Γ-Hypersemirings by Using Triangular Norms

The concept of Γ-semihyperrings was introduced by Dehkordi and Davvaz as a generalization of semirings, semihyperrings, and Γ-semiring. In this paper, by using the notion of triangular norms, we define the concept of triangular fuzzy sub-Γ-semihyperrings as well as triangular fuzzy Γ-hyperideals of a Γ-semihyperring, and we study a few results in this respect.

متن کامل

Natural Convection and Entropy Generation in Γ-Shaped Enclosure Using Lattice Boltzmann Method

This work presents a numerical analysis of entropy generation in Γ-Shaped enclosure that was submitted to the natural convection process using a simple thermal lattice Boltzmann method (TLBM) with the Boussinesq approximation.  A 2D thermal lattice Boltzmann method with 9 velocities, D2Q9, is used to solve the thermal flow problem. The simulations are performed at a constant Prandtl number (Pr ...

متن کامل

Preparation of γ-Al2O3 and Prioritization of Affecting Factors on the Crystallite Size Using Taguchi Method

In this work, boehmite sol was prepared by a previously applied and validated method; hydrolysis of aluminum chloride hexa-hydrate. In order to obtain precise results, the effect of pH after adding precipitating agent, aging time, peptizing temperature and ultrasonic vibration time on the crystallite size of final precipitate were investigated in a narrow range. The preparation conditions appli...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 6  شماره 1

صفحات  44- 55

تاریخ انتشار 2019-04-28

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023