In situ strength assessment of concrete using recycled aggregates by means of small diameter cores.

نویسندگان

  • S. Idriss Javadein Department of Civil Engineering, Arak Branch, Islamic Azad University, Arak, Iran
چکیده مقاله:

By increasing the demolition of old concrete structures and the interest of civil industries to consume cheaper materials, using Recycled Concrete Aggregate (RCA) can cause environmental protection and decrease the construction costs. On the other hand, the high potential of Recycled Aggregate Concrete (RAC) in concrete industry was established by extensive experimental researches were performed to examine the properties of RAC. Like in conventional concrete, core test cut from RAC can be used to assess the in-place concrete compressive strength and sometimes it becomes an important test for monitoring in-situ properties of concrete to taking up retrofitting/strengthening measures. So the core test is often mentioned in most codes for concrete testing. The layout of this study includes four concrete mixes, two concrete grades (20 and 40 MPa), three core diameters (46, 69, and 100 mm), five length-to-diameter (L/D) ratios (1, 1.25, 1.5, 1.75, and 2), two sizes of maximum coarse recycled aggregates (10 and 20 mm), two directions of core drilling which are vertical and horizontal and three ages of the specimen (14, 28 and 90 days). The core test results were compared to cylindrical and cube specimens. Results imply that the core strength of recycled concrete reduces with the increase in aspect ratio, by decreasing the core diameter, increasing the size of coarse aggregates in recycled concrete. By analyzing the results a comparison was made between recycled concrete in this study and conventional concrete in other studies, as well as code instructions.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Performance of High-strength Concrete Made with Recycled Ceramic Aggregates

Recent scientific concerns to achieve sustainability in construction have suggested the implementation of using recycled aggregate in concrete because it has the potential to reduce the demand for extraction of natural raw materials and decrease the volume of wastes landfilled. In this respect, this study aims to investigate the suitability of using ceramic tile (CT) and ceramic sanitary (CS) w...

متن کامل

the effect of taftan pozzolan on the compressive strength of concrete in the environmental conditions of oman sea (chabahar port)

cement is an essential ingredient in the concrete buildings. for production of cement considerable amount of fossil fuel and electrical energy is consumed. on the other hand for generating one tone of portland cement, nearly one ton of carbon dioxide is released. it shows that 7 percent of the total released carbon dioxide in the world relates to the cement industry. considering ecological issu...

Life Cycle Assessment of Sustainable Concrete Made With Recycled Aggregates

The results of an environmental study on concrete manufacture that follows the standard protocol of life cycle assessment are shown in this document. The study has been done for seven types of concrete: one conventional and six containing cement kiln dust (10%), marble sludge (10%) and demolition waste (10%, 80% and 100%) respectively, in partial or total substitution of natural aggregate. Six ...

متن کامل

assessment of the efficiency of s.p.g.c refineries using network dea

data envelopment analysis (dea) is a powerful tool for measuring relative efficiency of organizational units referred to as decision making units (dmus). in most cases dmus have network structures with internal linking activities. traditional dea models, however, consider dmus as black boxes with no regard to their linking activities and therefore do not provide decision makers with the reasons...

Low Cycle Fatigue Behavior of Concrete with Recycled Concrete Aggregates

A comparison of concrete containing recycled concrete coarse aggregates and natural coarse aggregates subjected to high strain, low cycle compressive fatigue is presented. Using a strain based feedback control loop, concrete cylinders are compressed at 15µε/s to a specified strain then unloaded to zero stress for 10 cycles. After cycling, all samples are loaded to a strain of 0.008. Direct conc...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 8  شماره 3

صفحات  158- 170

تاریخ انتشار 2020-08-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023