Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites

نویسندگان

  • Madeva Nagaral Aircraft Research and Design Centre, Hindustan Aeronautics Limited, Bangalore, Karnataka, India-560037
  • S A Kori Department of Mechanical Engineering, Basaveshwar Engineering College, Bagalkot, Karnataka, India-587102
  • V Auradi Department of Mechanical Engineering, Siddaganga Institute of Technology, Tumkur, Karnataka, India-572103
  • Veena Shivaprasad Department of Physics, Sir M Visvesvaraya Institute of Technology, Bangalore, Karnataka, India-562157
چکیده مقاله:

In the current research work synthesis, characterization, mechanical and wear behavior of 5 and 10 wt. % of nano TiO2 particulates reinforced Al7075 alloy composites are inspected. The Al7075 alloy and nano TiO2 particle composites were provided by melt stir system. After the preparation, the prepared composites were analyzed by SEM, EDS, and XRD for inquiring the microstructures and chemical elements. Furthermore, mechanical and wear behavior of as cast Al7075 alloy and Al7075 -5 and 10 wt. % of nano TiO2 composites were examined. Mechanical properties like hardness, UTS, yield quality, and ductility were assessed pursuant to ASTM measures. Pin on disc contraption was applied in order to lead the dry sliding wear tests. The analyses were led by differing loads and sliding speeds for a sliding distance of 3000 m. From the examination, it was discovered that the hardness, extreme strength and yield quality of composites were expanded because of nano TiO2 particles in the Al7075 amalgam grid. In nano TiO2 fortified composites the rate extension was diminished. Moreover, there was an expansion in the volumetric wear misfortune concerning the load, speed and sliding distance for all the readied materials. In order to inspect the fractography and dissimilar wear mechanisms for various test conditions of different compositions, tensile fractured surfaces and the worn surface morphology were analyzed by scanning electron microscope.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Mechanical and Tribological Behavior of Aluminum Alloy LM13 Reinforced with Titanium Dioxide Metal Matrix Composites

In the present research work physical, mechanical and tribological behavior of Aluminum (Al) alloy LM13 reinforced with Nano-sized Titanium Dioxide (TiO2) particulates were fabricated, mechanical and tribological properties were investigated. The amount of nano TiO2 particulates in the composite was added from 0.5% to 2% in 0.5 weight percent (wt %) increments. The Al-LM13-TiO2 Metal Matrix Com...

متن کامل

Synthesis of Nano Alumina Reinforced Magnesium-Alloy Composites

The main aim of this paper was to determine the amount of Al2O3 reinforcement that results into best combination of strength. Magnesium nano composites containing 3.5, 7.0 and 14 volume percentage of Al2O3 were synthesized through powder metallurgy route. Resistance of furnace sintering technique (heating rate: 49°C/min).Micro structural characterization revealed reasonably uniform distribution...

متن کامل

Microstructure and mechanical behavior of metallic glass fiber-reinforced Al alloy matrix composites

Metallic glass-reinforced metal matrix composites are an emerging class of composite materials. The metallic nature and the high mechanical strength of the reinforcing phase offers unique possibilities for improving the engineering performance of composites. Understanding the structure at the amorphous/crystalline interfaces and the deformation behavior of these composites is of vital importanc...

متن کامل

Aging behavior of nano-SiCp reinforced AZ61 magnesium matrix composites

Male, born in 1962, Ph.D, Professor. He obtained his Ph.D at Nanchang University. His research and teaching interests mainly focus on magnesium/aluminum alloys and investment casting process. He has published more than 200 papers by now. E-mail: [email protected] Received: 2011-01-25; Accepted: 2011-05-04 *Yan Hong *Yan Hong, Hu Xiaowu, Nie Qiao and Chen Lei (School of Mechanical-Electrical En...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 7  شماره 1

صفحات  71- 78

تاریخ انتشار 2020-04-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023