Meso-scale Modeling of Tension Analysis of Pure and Intra-ply Hybrid Woven Composites Using Finite Element Method
نویسندگان: ثبت نشده
چکیده مقاله:
One of the key issues associated with using of composites in various applications is their tensile behavior. The tensile behavior of a composite material is strongly influenced by the properties of its constituents and their distribution. This paper focuses on gaining some insights into the tensile process of pure and hybrid woven composite reinforced with brittle and ductile yarns. For this purpose, mesoscale finite element simulations were performed to detect the tensile response within three types of composites: i.e, a brittle fiber reinforced composite, a ductile fiber reinforced composite and a brittle/ductile fiber reinforced composite. The numerical predictions were then compared with the experimental observations and the results were discussed to give some insights into the reinforcing mechanisms in the composites. Based on the results it can be concluded that this finite element model is a reliable tool in the prediction of the tensile behavior of pure and hybrid composite materials.
منابع مشابه
Investigation of Mode I Delamination Resistance in Inter-ply and Intra-ply Hybrid Composites Reinforced with Basalt/Nylon Woven Fabrics
Due to their sensitivity to impact-induced delamination, woven fabric reinforced polymer composites have limited practical applications. Hybridization of polymer composites has been proposed as a solution to this problem. In this study, the effects of fiber reinforcement type, hybridization method, plies stacking sequence and loading rate on mode I delamination behavior of pure basalt, pure nyl...
متن کاملbuckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
Modelling and finite element treatment of intra-ply shearing of woven fabric
Diaphragm forming of fibre/epoxy materials is a potential cost-effective approach in manufacturing aerospace components. Significant intra-ply shearing is essential in diaphragm forming a double-curvature geometry. In previous studies, the intra-ply shearing was addressed based on an ideal fibre reinforced fluid (IFRF) model. The IFRF model was tried in the present study for a thermoset materia...
متن کاملModeling of impact damage of sewing machine needle on woven fabric by finite element method
متن کامل
Failure Prediction during uniaxial Superplastic Tension using Finite Element Method
Superplastic materials show a very high ductility. This is due to both peculiar process conditions and material intrinsic characteristics. However, a number of superplastic materials are subjected to cavitation during superplastic deformation. Evidently, extensive cavitation imposes significant limitations on their commercial application. The deformation and failure of superplastic sheet metals...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 3 شماره 2
صفحات 76- 85
تاریخ انتشار 2015-06-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023