Multi-objective optimization and analysis of electrical discharge machining process during micro-hole machining of D3 die steel employing salt mixed de-ionized water dielectric

نویسندگان

  • B. B. Pradhan Mechanical Engineering Department, Sikkim Manipal Institute of Technology (SMIT), Mazitar,Sikkim-737136, India
  • G. Kibria Mechanical Engineering Department, Aliah University Kolkata-700091, India
  • I. Shivakoti Mechanical Engineering Department, Sikkim Manipal Institute of Technology (SMIT), Mazitar,Sikkim-737136, India
  • S. Diyaley Mechanical Engineering Department, Sikkim Manipal Institute of Technology (SMIT), Mazitar,Sikkim-737136, India
چکیده مقاله:

Correct selection of manufacturing condition is one of the most important aspects which should be considered in the majority of manufacturing processes,  particularly in the process related to advanced machining process like electrical discharge machining. In electrical discharge machining (EDM), dielectric fluid plays an important role since machining characteristics are greatly influenced by the nature or characteristics of employed dielectric. Moreover, adding various types of abrasives or salt in the fluid at different concentrations also affect the machining performance because of changing dielectric strength property. The present paper addressed the influence of NaNO3 mixed de-ionized water as a dielectric fluid on micro-hole machining performance criteria such as material removal rate (MRR), tool wear rate (TWR), overcut (OC) and taper during machining of D3 die steel plate.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

multi-objective optimization and analysis of electrical discharge machining process during micro-hole machining of d3 die steel employing salt mixed de-ionized water dielectric

correct selection of manufacturing condition is one of the most important aspects which should be considered in the majority of manufacturing processes,  particularly in the process related to advanced machining process like electrical discharge machining. in electrical discharge machining (edm), dielectric fluid plays an important role since machining characteristics are greatly influenced by ...

متن کامل

Investigation and Fuzzy Based Modeling of Micro-edm Process during Machining of Micro-hole in D3 Die Steel Material Employing De-ionized Water

The correct selection of process parameters for manufacturing is one of the most important aspects taken into consideration in the majority of manufacturing processes and particularly, in process related to EDM. The machining characteristics are greatly influenced by the nature of dielectric used during micro-EDM. The present paper investigates the fuzzy logic model for micro-electrical dischar...

متن کامل

Modeling and Simulation of Micro Electrical Discharge Machining Process

ii ACKNOWLEDGEMENTS iv TABLE OF CONTENTS v LIST OF FIGURES ix LIST OF TABLES xiii CHAPTER

متن کامل

Optimization of Machining Parametric Study on Electrical Discharge Machining

Abstract—Productivity and quality are two important aspects that have become great concerns in today’s competitive global market. Every production/manufacturing unit mainly focuses on these areas in relation to the process, as well as the product developed. The electrical discharge machining (EDM) process, even now it is an experience process, wherein the selected parameters are still often far...

متن کامل

Optimization of machining parameters and wire vibration in wire electrical discharge machining process

Background: Wire Electrical discharge machining (WEDM) has higher capability for cutting complex shapes with high precision for very hard materials without using high cost of cutting tools. During the WEDM process, the wire behaves like a metal string, straightened by two axial pulling forces and deformed laterally by a sum of forces from the discharge process. Major forces acting on the wire c...

متن کامل

Review on Micro Electrical Discharge Machining

Recent trend in reducing the size of products has given Micro Electrical Discharge Machining (MEDM) a significant amount of research attention. Due to the high precision, low tolerance and good surface quality that it can deliver, MEDM is potentially an important process for fabrication of micro-tools, micro-components and parts with micro-features. This paper briefs and highlights the various ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 3  شماره 1

صفحات  27- 39

تاریخ انتشار 2013-09-11

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023