Numerical analysis of gas flows in a microchannel using the Cascaded Lattice Boltzmann Method with varying Bosanquet parameter

نویسندگان

  • M. Shomali Department of Mechanical Engineering, University of Kashan, Kashan, Iran
چکیده مقاله:

Abstract. In this paper, a Cascaded Lattice Boltzmann Method with second order slip boundary conditions is developed to study gas flows in a microchannel in the slip and transition flow regimes with a wide range of Knudsen numbers. For the first time the effect of wall confinement is considered on the effective mean free path of the gas molecules using a function with nonconstant Bosanquet parameter instead of the constant one. The constant-force driven and pressure-driven gas flows in a long microchannel are simulated under different conditions. The results of the velocity profile, pressure distribution, and mass flow rate are in good agreement with the benchmark solutions and experimental data reported in the literature. The Knudsen minimum phenomenon is also well captured by the present model. The proposed Cascaded Lattice Boltzmann Method shows a clear improvement in predicting the flow behaviors of microchannel gas flows for the previous classic and Cascaded Lattice Boltzmann Method

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Application of lattice Boltzmann method to simulate microchannel flows

Microflow has become a popular field of interest due to the advent of microelectromechanical systems. In this work, the lattice Boltzmann method, a particle-based approach, is applied to simulate the two-dimensional isothermal pressure driven microchannel flow. Two boundary treatment schemes are incorporated to investigate their impacts to the entire flow field. We pay particular attention to t...

متن کامل

Numerical Simulation of Fluid Flow Past a Square Cylinder Using a Lattice Boltzmann Method

The method of lattice boltzmann equation(LBE) is a kinetic-based approach for fluid flow computations. In the last decade, minimal kinetic models, and primarily the LBE, have met with significant success in the simulation of complex hydrodynamic phenomena, ranging from slow flows in grossly irregular geometries to fully developed turbulence, to flow with dynamic phase transitions. In the presen...

متن کامل

Lattice Boltzmann method for direct numerical simulation of turbulent flows

We present three-dimensional direct numerical simulations (DNS) of the Kida vortex flow, a prototypical turbulent flow, using a novel high-order lattice Boltzmann (LB) model. Extensive comparisons of various global and local statistical quantities obtained with an incompressible-flow spectral element solver are reported. It is demonstrated that the LB method is a promising alternative for DNS a...

متن کامل

Using the Lattice Boltzmann Method for the numerical study of non-fourier conduction with variable thermal conductivity

The lattice Boltzmann method (LBM) was used to analyze two-dimensional (2D) non-Fourier heat conduction with temperature-dependent thermal conductivity. To this end, the evolution of wave-like temperature distributions in a 2D plate was obtained. The temperature distributions along certain parts of the plate, which was subjected to heat generation and constant thermal conductivity condit...

متن کامل

A Lattice Boltzmann Method with Adaptive Mesh Refinement (AMR) for the simulation of gas-liquid flows

Two-phase flows with dynamic interfaces are ubiquitous in daily life as well as in many industrial applications. Gas bubbles and liquid droplets are typical forms of these twophase flows. In chemical engineering, understanding the dynamics of these bubbles and droplets is crucial to the design and operation of the two-phase flow reactors, ranging from microfluidic devices to large systems such ...

متن کامل

Lattice Boltzmann models for nonequilibrium gas flows.

Due to its computational efficiency, the kinetic-based lattice Boltzmann method has recently been used to model nonequilibrium gas dynamics. With appropriate boundary conditions, lattice Boltzmann models have been able to capture both velocity slip and temperature jump at a solid surface. To enable these models to simulate flows in the transition regime, both high-order and modified lattice Bol...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 7  شماره 1

صفحات  25- 38

تاریخ انتشار 2020-05-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023