Numerical simulation of nanofluids flow and heat transfer through isosceles triangular channels

نویسندگان

  • Mehri Hejri Department of Chemical Engineering, Quchan Branch, Islamic Azad University Quchan, Iran
  • Mohammad Hojjat Department of Chemical Engineering, Faculty of Engineering, University of Isfahan, Isfahan, Iran
  • Seyed Gholamreza Etemad Department of Chemical Engineering, Isfahan University of Technology, Isfahan, 84156-83111 Iran International Academy of Science, Engineering, and Technology, Ottawa, Canada
چکیده مقاله:

Nanofluids are stable suspensions of nanoparticles in conventional heat transfer fluids (base fluids) that exhibit better thermal characteristics compared to those of the base fluids. It is important to clarify various aspects of nanofluids behavior. In order to identify the thermal and hydrodynamic behavior of nanofluids flowing through non-circular ducts, in the present study the laminar flow forced convective heat transfer of Al2O3/water nanofluid thorough channels with isosceles triangle cross section with constant wall heat flux was studied numerically. The effects of nanoparticle concentration, nanofluid flow rate and geometry of channels on the thermal and hydrodynamic behavior of nanofluids were studied. The single-phase model was used in simulations under steady state conditions. Results reveal that the local and average heat transfer coefficients of nanofluids are greater than those of the base fluid. Heat transfer coefficient enhancement of nanofluids increases with increase in nanoparticle concentration and Reynolds number. The local heat transfer coefficient of the base fluid and that of the nanofluids decrease with the axial distance from the channel inlet. Results also indicate that an increase in the apex angle of the channel, decreases the Nusselt number and heat transfer coefficient. The wall friction coefficient decreases with increasing axial distance from the channel inlet and approaches a constant value in the developed region. Friction coefficient and pressure drop decrease by increasing the apex angle of the channels. 

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Simulation of Convective Heat Transfer and Pressure Drop in Laminar Flow of Al2O3/water and CuO/water Nanofluids Through Square and Triangular Cross-Sectional Ducts

In this study, the convective heat transfer and pressure drop in laminar flow of Al2O3/water and CuO/water nanofluids through square and triangular cross-sectional ducts have been numerically investigated using new technique. It has been assumed that there is constant heat flux boundary condition at walls. In addition, to include the presence of nanoparticles, the dispersion model has been used...

متن کامل

Numerical Study of Laminar Flow and Convective Heat Transfer Utilizing Nanofluids in Equilateral Triangular Ducts with Constant Heat Flux

This study numerically investigates heat transfer augmentation using water-based Al₂O₃ and CuO nanofluids flowing in a triangular cross-sectional duct under constant heat flux in laminar flow conditions. The Al₂O₃/water nanofluids with different volume fractions (0.1%, 0.5%, 1%, 1.5%, and 2%) and CuO/water nanofluids with various volume fractions (0.05%, 0.16%, 0.36%, 0.5%, and 0.8%) are employ...

متن کامل

Fluid Flow and Heat Transfer of Nanofluids over a Flat Plate with Conjugate Heat Transfer

The falling and settling of solid particles in gases and liquids is a natural phenomenon happens in many industrial processes. This phenomenon has altered pure forced convection to a combination of heat conduction and heat convection in a flow over a plate. In this paper, the coupling of conduction (inside the plate) and forced convection of a non-homogeneous nanofluid flow (over a flat plate) ...

متن کامل

Unsteady Numerical Investigations of Flow and Heat Transfer Characteristics of Nanofluids in a Confined Jet Using Two-Phase Mixture Model

The development of high-performance thermal systems has increased interest in heat transfer enhancement techniques. The application of additives to heat transfer liquids is one of the noticeable effort to enhance heat transfer. In this paper two-dimensional unsteady incompressible nanofluid flow in a confined jet at the laminar flow regime is numerically investigated. The Mixture model is consi...

متن کامل

fluid flow and heat transfer of nanofluids over a flat plate with conjugate heat transfer

the falling and settling of solid particles in gases and liquids is a natural phenomenon happens in many industrial processes. this phenomenon has altered pure forced convection to a combination of heat conduction and heat convection in a flow over a plate. in this paper, the coupling of conduction (inside the plate) and forced convection of a non-homogeneous nanofluid flow (over a flat plate) ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 4  شماره 1

صفحات  29- 38

تاریخ انتشار 2018-07-20

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023